Mini Shell
Direktori : /usr/share/snmp/mibs/ |
|
Current File : //usr/share/snmp/mibs/HOST-RESOURCES-MIB.txt |
HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Integer32, Counter32, Gauge32, TimeTicks FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString,
TruthValue, DateAndTime, AutonomousType FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
InterfaceIndexOrZero FROM IF-MIB;
hostResourcesMibModule MODULE-IDENTITY
LAST-UPDATED "200003060000Z" -- 6 March 2000
ORGANIZATION "IETF Host Resources MIB Working Group"
CONTACT-INFO
"Steve Waldbusser
Postal: Lucent Technologies, Inc.
1213 Innsbruck Dr.
Sunnyvale, CA 94089
USA
Phone: 650-318-1251
Fax: 650-318-1633
Email: waldbusser@lucent.com
In addition, the Host Resources MIB mailing list is
dedicated to discussion of this MIB. To join the
mailing list, send a request message to
hostmib-request@andrew.cmu.edu. The mailing list
address is hostmib@andrew.cmu.edu."
DESCRIPTION
"This MIB is for use in managing host systems. The term
`host' is construed to mean any computer that communicates
with other similar computers attached to the internet and
that is directly used by one or more human beings. Although
this MIB does not necessarily apply to devices whose primary
function is communications services (e.g., terminal servers,
routers, bridges, monitoring equipment), such relevance is
not explicitly precluded. This MIB instruments attributes
common to all internet hosts including, for example, both
personal computers and systems that run variants of Unix."
REVISION "200003060000Z" -- 6 March 2000
DESCRIPTION
"Clarifications and bug fixes based on implementation
experience. This revision was also reformatted in the SMIv2
format. The revisions made were:
New RFC document standards:
Added Copyright notice, updated introduction to SNMP
Framework, updated references section, added reference to
RFC 2119, and added a meaningful Security Considerations
section.
New IANA considerations section for registration of new types
Conversion to new SMIv2 syntax for the following types and
macros:
Counter32, Integer32, Gauge32, MODULE-IDENTITY,
OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY,
MODULE-COMPLIANCE, OBJECT-GROUP
Used new Textual Conventions:
TruthValue, DateAndTime, AutonomousType,
InterfaceIndexOrZero
Fixed typo in hrPrinterStatus.
Added missing error bits to hrPrinterDetectedErrorState and
clarified confusion resulting from suggested mappings to
hrPrinterStatus.
Clarified that size of objects of type
InternationalDisplayString is number of octets, not number
of encoded symbols.
Clarified the use of the following objects based on
implementation experience:
hrSystemInitialLoadDevice, hrSystemInitialLoadParameters,
hrMemorySize, hrStorageSize, hrStorageAllocationFailures,
hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex,
hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU,
and hrSWInstalledDate.
Clarified implementation technique for hrSWInstalledTable.
Used new AUGMENTS clause for hrSWRunPerfTable.
Added Internationalization Considerations section.
This revision published as RFC2790."
REVISION "9910202200Z" -- 20 October, 1999
DESCRIPTION
"The original version of this MIB, published as
RFC1514."
::= { hrMIBAdminInfo 1 }
host OBJECT IDENTIFIER ::= { mib-2 25 }
hrSystem OBJECT IDENTIFIER ::= { host 1 }
hrStorage OBJECT IDENTIFIER ::= { host 2 }
hrDevice OBJECT IDENTIFIER ::= { host 3 }
hrSWRun OBJECT IDENTIFIER ::= { host 4 }
hrSWRunPerf OBJECT IDENTIFIER ::= { host 5 }
hrSWInstalled OBJECT IDENTIFIER ::= { host 6 }
hrMIBAdminInfo OBJECT IDENTIFIER ::= { host 7 }
-- textual conventions
KBytes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Storage size, expressed in units of 1024 bytes."
SYNTAX Integer32 (0..2147483647)
ProductID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is intended to identify the
manufacturer, model, and version of a specific
hardware or software product. It is suggested that
these OBJECT IDENTIFIERs are allocated such that all
products from a particular manufacturer are registered
under a subtree distinct to that manufacturer. In
addition, all versions of a product should be
registered under a subtree distinct to that product.
With this strategy, a management station may uniquely
determine the manufacturer and/or model of a product
whose productID is unknown to the management station.
Objects of this type may be useful for inventory
purposes or for automatically detecting
incompatibilities or version mismatches between
various hardware and software components on a system.
For example, the product ID for the ACME 4860 66MHz
clock doubled processor might be:
enterprises.acme.acmeProcessors.a4860DX2.MHz66
A software product might be registered as:
enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1)
"
SYNTAX OBJECT IDENTIFIER
-- unknownProduct will be used for any unknown ProductID
-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 }
InternationalDisplayString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model textual information
in some character set. A network management station
should use a local algorithm to determine which
character set is in use and how it should be
displayed. Note that this character set may be
encoded with more than one octet per symbol, but will
most often be NVT ASCII. When a size clause is
specified for an object of this type, the size refers
to the length in octets, not the number of symbols."
SYNTAX OCTET STRING
-- The Host Resources System Group
hrSystemUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time since this host was last
initialized. Note that this is different from
sysUpTime in the SNMPv2-MIB [RFC1907] because
sysUpTime is the uptime of the network management
portion of the system."
::= { hrSystem 1 }
hrSystemDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host's notion of the local date and time of day."
::= { hrSystem 2 }
hrSystemInitialLoadDevice OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the hrDeviceEntry for the device from
which this host is configured to load its initial
operating system configuration (i.e., which operating
system code and/or boot parameters).
Note that writing to this object just changes the
configuration that will be used the next time the
operating system is loaded and does not actually cause
the reload to occur."
::= { hrSystem 3 }
hrSystemInitialLoadParameters OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the parameters (e.g. a pathname
and parameter) supplied to the load device when
requesting the initial operating system configuration
from that device.
Note that writing to this object just changes the
configuration that will be used the next time the
operating system is loaded and does not actually cause
the reload to occur."
::= { hrSystem 4 }
hrSystemNumUsers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user sessions for which this host is
storing state information. A session is a collection
of processes requiring a single act of user
authentication and possibly subject to collective job
control."
::= { hrSystem 5 }
hrSystemProcesses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of process contexts currently loaded or
running on this system."
::= { hrSystem 6 }
hrSystemMaxProcesses OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of process contexts this system
can support. If there is no fixed maximum, the value
should be zero. On systems that have a fixed maximum,
this object can help diagnose failures that occur when
this maximum is reached."
::= { hrSystem 7 }
-- The Host Resources Storage Group
-- Registration point for storage types, for use with hrStorageType.
-- These are defined in the HOST-RESOURCES-TYPES module.
hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 }
hrMemorySize OBJECT-TYPE
SYNTAX KBytes
UNITS "KBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of physical read-write main memory,
typically RAM, contained by the host."
::= { hrStorage 2 }
hrStorageTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of logical storage areas on
the host.
An entry shall be placed in the storage table for each
logical area of storage that is allocated and has
fixed resource limits. The amount of storage
represented in an entity is the amount actually usable
by the requesting entity, and excludes loss due to
formatting or file system reference information.
These entries are associated with logical storage
areas, as might be seen by an application, rather than
physical storage entities which are typically seen by
an operating system. Storage such as tapes and
floppies without file systems on them are typically
not allocated in chunks by the operating system to
requesting applications, and therefore shouldn't
appear in this table. Examples of valid storage for
this table include disk partitions, file systems, ram
(for some architectures this is further segmented into
regular memory, extended memory, and so on), backing
store for virtual memory (`swap space').
This table is intended to be a useful diagnostic for
`out of memory' and `out of buffers' types of
failures. In addition, it can be a useful performance
monitoring tool for tracking memory, disk, or buffer
usage."
::= { hrStorage 3 }
hrStorageEntry OBJECT-TYPE
SYNTAX HrStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one logical storage area on
the host. As an example, an instance of the
hrStorageType object might be named hrStorageType.3"
INDEX { hrStorageIndex }
::= { hrStorageTable 1 }
HrStorageEntry ::= SEQUENCE {
hrStorageIndex Integer32,
hrStorageType AutonomousType,
hrStorageDescr DisplayString,
hrStorageAllocationUnits Integer32,
hrStorageSize Integer32,
hrStorageUsed Integer32,
hrStorageAllocationFailures Counter32
}
hrStorageIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each logical storage area
contained by the host."
::= { hrStorageEntry 1 }
hrStorageType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of storage represented by this entry."
::= { hrStorageEntry 2 }
hrStorageDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description of the type and instance of the storage
described by this entry."
::= { hrStorageEntry 3 }
hrStorageAllocationUnits OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size, in bytes, of the data objects allocated
from this pool. If this entry is monitoring sectors,
blocks, buffers, or packets, for example, this number
will commonly be greater than one. Otherwise this
number will typically be one."
::= { hrStorageEntry 4 }
hrStorageSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the storage represented by this entry, in
units of hrStorageAllocationUnits. This object is
writable to allow remote configuration of the size of
the storage area in those cases where such an
operation makes sense and is possible on the
underlying system. For example, the amount of main
memory allocated to a buffer pool might be modified or
the amount of disk space allocated to virtual memory
might be modified."
::= { hrStorageEntry 5 }
hrStorageUsed OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the storage represented by this entry
that is allocated, in units of
hrStorageAllocationUnits."
::= { hrStorageEntry 6 }
hrStorageAllocationFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests for storage represented by
this entry that could not be honored due to not enough
storage. It should be noted that as this object has a
SYNTAX of Counter32, that it does not have a defined
initial value. However, it is recommended that this
object be initialized to zero, even though management
stations must not depend on such an initialization."
::= { hrStorageEntry 7 }
-- The Host Resources Device Group
--
-- The device group is useful for identifying and diagnosing the
-- devices on a system. The hrDeviceTable contains common
-- information for any type of device. In addition, some devices
-- have device-specific tables for more detailed information. More
-- such tables may be defined in the future for other device types.
-- Registration point for device types, for use with hrDeviceType.
-- These are defined in the HOST-RESOURCES-TYPES module.
hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 }
hrDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of devices contained by the
host."
::= { hrDevice 2 }
hrDeviceEntry OBJECT-TYPE
SYNTAX HrDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one device contained by the
host. As an example, an instance of the hrDeviceType
object might be named hrDeviceType.3"
INDEX { hrDeviceIndex }
::= { hrDeviceTable 1 }
HrDeviceEntry ::= SEQUENCE {
hrDeviceIndex Integer32,
hrDeviceType AutonomousType,
hrDeviceDescr DisplayString,
hrDeviceID ProductID,
hrDeviceStatus INTEGER,
hrDeviceErrors Counter32
}
hrDeviceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization."
::= { hrDeviceEntry 1 }
hrDeviceType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the type of device.
If this value is
`hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
exists in the hrProcessorTable which corresponds to
this device.
If this value is
`hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
exists in the hrNetworkTable which corresponds to this
device.
If this value is
`hrDevicePrinter { hrDeviceTypes 5 }', then an entry
exists in the hrPrinterTable which corresponds to this
device.
If this value is
`hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
entry exists in the hrDiskStorageTable which
corresponds to this device."
::= { hrDeviceEntry 2 }
hrDeviceDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of this device, including the
device's manufacturer and revision, and optionally,
its serial number."
::= { hrDeviceEntry 3 }
hrDeviceID OBJECT-TYPE
SYNTAX ProductID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product ID for this device."
::= { hrDeviceEntry 4 }
hrDeviceStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
running(2),
warning(3),
testing(4),
down(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the device described
by this row of the table. A value unknown(1)
indicates that the current state of the device is
unknown. running(2) indicates that the device is up
and running and that no unusual error conditions are
known. The warning(3) state indicates that agent has
been informed of an unusual error condition by the
operational software (e.g., a disk device driver) but
that the device is still 'operational'. An example
would be a high number of soft errors on a disk. A
value of testing(4), indicates that the device is not
available for use because it is in the testing state.
The state of down(5) is used only when the agent has
been informed that the device is not available for any
use."
::= { hrDeviceEntry 5 }
hrDeviceErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errors detected on this device. It
should be noted that as this object has a SYNTAX of
Counter32, that it does not have a defined initial
value. However, it is recommended that this object be
initialized to zero, even though management stations
must not depend on such an initialization."
::= { hrDeviceEntry 6 }
hrProcessorTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrProcessorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of processors contained by the
host.
Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDeviceProcessor'."
::= { hrDevice 3 }
hrProcessorEntry OBJECT-TYPE
SYNTAX HrProcessorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one processor contained by
the host. The hrDeviceIndex in the index represents
the entry in the hrDeviceTable that corresponds to the
hrProcessorEntry.
As an example of how objects in this table are named,
an instance of the hrProcessorFrwID object might be
named hrProcessorFrwID.3"
INDEX { hrDeviceIndex }
::= { hrProcessorTable 1 }
HrProcessorEntry ::= SEQUENCE {
hrProcessorFrwID ProductID,
hrProcessorLoad Integer32
}
hrProcessorFrwID OBJECT-TYPE
SYNTAX ProductID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product ID of the firmware associated with the
processor."
::= { hrProcessorEntry 1 }
hrProcessorLoad OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over the last minute, of the percentage
of time that this processor was not idle.
Implementations may approximate this one minute
smoothing period if necessary."
::= { hrProcessorEntry 2 }
hrNetworkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of network devices contained
by the host.
Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDeviceNetwork'."
::= { hrDevice 4 }
hrNetworkEntry OBJECT-TYPE
SYNTAX HrNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one network device contained
by the host. The hrDeviceIndex in the index
represents the entry in the hrDeviceTable that
corresponds to the hrNetworkEntry.
As an example of how objects in this table are named,
an instance of the hrNetworkIfIndex object might be
named hrNetworkIfIndex.3"
INDEX { hrDeviceIndex }
::= { hrNetworkTable 1 }
HrNetworkEntry ::= SEQUENCE {
hrNetworkIfIndex InterfaceIndexOrZero
}
hrNetworkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex which corresponds to this
network device. If this device is not represented in
the ifTable, then this value shall be zero."
::= { hrNetworkEntry 1 }
hrPrinterTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrPrinterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of printers local to the host.
Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDevicePrinter'."
::= { hrDevice 5 }
hrPrinterEntry OBJECT-TYPE
SYNTAX HrPrinterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one printer local to the
host. The hrDeviceIndex in the index represents the
entry in the hrDeviceTable that corresponds to the
hrPrinterEntry.
As an example of how objects in this table are named,
an instance of the hrPrinterStatus object might be
named hrPrinterStatus.3"
INDEX { hrDeviceIndex }
::= { hrPrinterTable 1 }
HrPrinterEntry ::= SEQUENCE {
hrPrinterStatus INTEGER,
hrPrinterDetectedErrorState OCTET STRING
}
hrPrinterStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
idle(3),
printing(4),
warmup(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of this printer device."
::= { hrPrinterEntry 1 }
hrPrinterDetectedErrorState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents any error conditions detected
by the printer. The error conditions are encoded as
bits in an octet string, with the following
definitions:
Condition Bit #
lowPaper 0
noPaper 1
lowToner 2
noToner 3
doorOpen 4
jammed 5
offline 6
serviceRequested 7
inputTrayMissing 8
outputTrayMissing 9
markerSupplyMissing 10
outputNearFull 11
outputFull 12
inputTrayEmpty 13
overduePreventMaint 14
Bits are numbered starting with the most significant
bit of the first byte being bit 0, the least
significant bit of the first byte being bit 7, the
most significant bit of the second byte being bit 8,
and so on. A one bit encodes that the condition was
detected, while a zero bit encodes that the condition
was not detected.
This object is useful for alerting an operator to
specific warning or error conditions that may occur,
especially those requiring human intervention."
::= { hrPrinterEntry 2 }
hrDiskStorageTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrDiskStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of long-term storage devices
contained by the host. In particular, disk devices
accessed remotely over a network are not included
here.
Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDeviceDiskStorage'."
::= { hrDevice 6 }
hrDiskStorageEntry OBJECT-TYPE
SYNTAX HrDiskStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one long-term storage device
contained by the host. The hrDeviceIndex in the index
represents the entry in the hrDeviceTable that
corresponds to the hrDiskStorageEntry. As an example,
an instance of the hrDiskStorageCapacity object might
be named hrDiskStorageCapacity.3"
INDEX { hrDeviceIndex }
::= { hrDiskStorageTable 1 }
HrDiskStorageEntry ::= SEQUENCE {
hrDiskStorageAccess INTEGER,
hrDiskStorageMedia INTEGER,
hrDiskStorageRemoveble TruthValue,
hrDiskStorageCapacity KBytes
}
hrDiskStorageAccess OBJECT-TYPE
SYNTAX INTEGER {
readWrite(1),
readOnly(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication if this long-term storage device is
readable and writable or only readable. This should
reflect the media type, any write-protect mechanism,
and any device configuration that affects the entire
device."
::= { hrDiskStorageEntry 1 }
hrDiskStorageMedia OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
hardDisk(3),
floppyDisk(4),
opticalDiskROM(5),
opticalDiskWORM(6), -- Write Once Read Many
opticalDiskRW(7),
ramDisk(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the type of media used in this long-
term storage device."
::= { hrDiskStorageEntry 2 }
hrDiskStorageRemoveble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes whether or not the disk media may be removed
from the drive."
::= { hrDiskStorageEntry 3 }
hrDiskStorageCapacity OBJECT-TYPE
SYNTAX KBytes
UNITS "KBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total size for this long-term storage device. If
the media is removable and is currently removed, this
value should be zero."
::= { hrDiskStorageEntry 4 }
hrPartitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrPartitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of partitions for long-term
storage devices contained by the host. In particular,
partitions accessed remotely over a network are not
included here."
::= { hrDevice 7 }
hrPartitionEntry OBJECT-TYPE
SYNTAX HrPartitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one partition. The
hrDeviceIndex in the index represents the entry in the
hrDeviceTable that corresponds to the
hrPartitionEntry.
As an example of how objects in this table are named,
an instance of the hrPartitionSize object might be
named hrPartitionSize.3.1"
INDEX { hrDeviceIndex, hrPartitionIndex }
::= { hrPartitionTable 1 }
HrPartitionEntry ::= SEQUENCE {
hrPartitionIndex Integer32,
hrPartitionLabel InternationalDisplayString,
hrPartitionID OCTET STRING,
hrPartitionSize KBytes,
hrPartitionFSIndex Integer32
}
hrPartitionIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each partition on this long-term
storage device. The value for each long-term storage
device must remain constant at least from one re-
initialization of the agent to the next re-
initialization."
::= { hrPartitionEntry 1 }
hrPartitionLabel OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of this partition."
::= { hrPartitionEntry 2 }
hrPartitionID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A descriptor which uniquely represents this partition
to the responsible operating system. On some systems,
this might take on a binary representation."
::= { hrPartitionEntry 3 }
hrPartitionSize OBJECT-TYPE
SYNTAX KBytes
UNITS "KBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of this partition."
::= { hrPartitionEntry 4 }
hrPartitionFSIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the file system mounted on this
partition. If no file system is mounted on this
partition, then this value shall be zero. Note that
multiple partitions may point to one file system,
denoting that that file system resides on those
partitions. Multiple file systems may not reside on
one partition."
::= { hrPartitionEntry 5 }
-- The File System Table
-- Registration point for popular File System types,
-- for use with hrFSType. These are defined in the
-- HOST-RESOURCES-TYPES module.
hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 }
hrFSTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrFSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of file systems local to this
host or remotely mounted from a file server. File
systems that are in only one user's environment on a
multi-user system will not be included in this table."
::= { hrDevice 8 }
hrFSEntry OBJECT-TYPE
SYNTAX HrFSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one file system local to
this host or remotely mounted from a file server.
File systems that are in only one user's environment
on a multi-user system will not be included in this
table.
As an example of how objects in this table are named,
an instance of the hrFSMountPoint object might be
named hrFSMountPoint.3"
INDEX { hrFSIndex }
::= { hrFSTable 1 }
HrFSEntry ::= SEQUENCE {
hrFSIndex Integer32,
hrFSMountPoint InternationalDisplayString,
hrFSRemoteMountPoint InternationalDisplayString,
hrFSType AutonomousType,
hrFSAccess INTEGER,
hrFSBootable TruthValue,
hrFSStorageIndex Integer32,
hrFSLastFullBackupDate DateAndTime,
hrFSLastPartialBackupDate DateAndTime
}
hrFSIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each file system local to this
host. The value for each file system must remain
constant at least from one re-initialization of the
agent to the next re-initialization."
::= { hrFSEntry 1 }
hrFSMountPoint OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path name of the root of this file system."
::= { hrFSEntry 2 }
hrFSRemoteMountPoint OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description of the name and/or address of the
server that this file system is mounted from. This
may also include parameters such as the mount point on
the remote file system. If this is not a remote file
system, this string should have a length of zero."
::= { hrFSEntry 3 }
hrFSType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the type of this
file system."
::= { hrFSEntry 4 }
hrFSAccess OBJECT-TYPE
SYNTAX INTEGER {
readWrite(1),
readOnly(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication if this file system is logically
configured by the operating system to be readable and
writable or only readable. This does not represent
any local access-control policy, except one that is
applied to the file system as a whole."
::= { hrFSEntry 5 }
hrFSBootable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether this file system is
bootable."
::= { hrFSEntry 6 }
hrFSStorageIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the hrStorageEntry that represents
information about this file system. If there is no
such information available, then this value shall be
zero. The relevant storage entry will be useful in
tracking the percent usage of this file system and
diagnosing errors that may occur when it runs out of
space."
::= { hrFSEntry 7 }
hrFSLastFullBackupDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last date at which this complete file system was
copied to another storage device for backup. This
information is useful for ensuring that backups are
being performed regularly.
If this information is not known, then this variable
shall have the value corresponding to January 1, year
0000, 00:00:00.0, which is encoded as
(hex)'00 00 01 01 00 00 00 00'."
::= { hrFSEntry 8 }
hrFSLastPartialBackupDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last date at which a portion of this file system
was copied to another storage device for backup. This
information is useful for ensuring that backups are
being performed regularly.
If this information is not known, then this variable
shall have the value corresponding to January 1, year
0000, 00:00:00.0, which is encoded as
(hex)'00 00 01 01 00 00 00 00'."
::= { hrFSEntry 9 }
-- The Host Resources Running Software Group
--
-- The hrSWRunTable contains an entry for each distinct piece of
-- software that is running or loaded into physical or virtual
-- memory in preparation for running. This includes the host's
-- operating system, device drivers, and applications.
hrSWOSIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the hrSWRunIndex for the hrSWRunEntry
that represents the primary operating system running
on this host. This object is useful for quickly and
uniquely identifying that primary operating system."
::= { hrSWRun 1 }
hrSWRunTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrSWRunEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of software running on the
host."
::= { hrSWRun 2 }
hrSWRunEntry OBJECT-TYPE
SYNTAX HrSWRunEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for one piece of software
running on the host Note that because the installed
software table only contains information for software
stored locally on this host, not every piece of
running software will be found in the installed
software table. This is true of software that was
loaded and run from a non-local source, such as a
network-mounted file system.
As an example of how objects in this table are named,
an instance of the hrSWRunName object might be named
hrSWRunName.1287"
INDEX { hrSWRunIndex }
::= { hrSWRunTable 1 }
HrSWRunEntry ::= SEQUENCE {
hrSWRunIndex Integer32,
hrSWRunName InternationalDisplayString,
hrSWRunID ProductID,
hrSWRunPath InternationalDisplayString,
hrSWRunParameters InternationalDisplayString,
hrSWRunType INTEGER,
hrSWRunStatus INTEGER
}
hrSWRunIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each piece of software running on
the host. Wherever possible, this should be the
system's native, unique identification number."
::= { hrSWRunEntry 1 }
hrSWRunName OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of this running piece of
software, including the manufacturer, revision, and
the name by which it is commonly known. If this
software was installed locally, this should be the
same string as used in the corresponding
hrSWInstalledName."
::= { hrSWRunEntry 2 }
hrSWRunID OBJECT-TYPE
SYNTAX ProductID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product ID of this running piece of software."
::= { hrSWRunEntry 3 }
hrSWRunPath OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description of the location on long-term storage
(e.g. a disk drive) from which this software was
loaded."
::= { hrSWRunEntry 4 }
hrSWRunParameters OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description of the parameters supplied to this
software when it was initially loaded."
::= { hrSWRunEntry 5 }
hrSWRunType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
operatingSystem(2),
deviceDriver(3),
application(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this software."
::= { hrSWRunEntry 6 }
hrSWRunStatus OBJECT-TYPE
SYNTAX INTEGER {
running(1),
runnable(2), -- waiting for resource
-- (i.e., CPU, memory, IO)
notRunnable(3), -- loaded but waiting for event
invalid(4) -- not loaded
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this running piece of software.
Setting this value to invalid(4) shall cause this
software to stop running and to be unloaded. Sets to
other values are not valid."
::= { hrSWRunEntry 7 }
-- The Host Resources Running Software Performance Group
--
-- The hrSWRunPerfTable contains an entry corresponding to
-- each entry in the hrSWRunTable.
hrSWRunPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrSWRunPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of running software
performance metrics."
::= { hrSWRunPerf 1 }
hrSWRunPerfEntry OBJECT-TYPE
SYNTAX HrSWRunPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry containing software performance
metrics. As an example, an instance of the
hrSWRunPerfCPU object might be named
hrSWRunPerfCPU.1287"
AUGMENTS { hrSWRunEntry } -- This table augments information in
-- the hrSWRunTable.
::= { hrSWRunPerfTable 1 }
HrSWRunPerfEntry ::= SEQUENCE {
hrSWRunPerfCPU Integer32,
hrSWRunPerfMem KBytes
}
hrSWRunPerfCPU OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of centi-seconds of the total system's CPU
resources consumed by this process. Note that on a
multi-processor system, this value may increment by
more than one centi-second in one centi-second of real
(wall clock) time."
::= { hrSWRunPerfEntry 1 }
hrSWRunPerfMem OBJECT-TYPE
SYNTAX KBytes
UNITS "KBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real system memory allocated to
this process."
::= { hrSWRunPerfEntry 2 }
-- The Host Resources Installed Software Group
--
-- The hrSWInstalledTable contains an entry for each piece
-- of software installed in long-term storage (e.g. a disk
-- drive) locally on this host. Note that this does not
-- include software loadable remotely from a network
-- server.
--
-- Different implementations may track software in varying
-- ways. For example, while some implementations may track
-- executable files as distinct pieces of software, other
-- implementations may use other strategies such as keeping
-- track of software "packages" (e.g., related groups of files)
-- or keeping track of system or application "patches".
--
-- This table is useful for identifying and inventorying
-- software on a host and for diagnosing incompatibility
-- and version mismatch problems between various pieces
-- of hardware and software.
hrSWInstalledLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when an entry in the
hrSWInstalledTable was last added, renamed, or
deleted. Because this table is likely to contain many
entries, polling of this object allows a management
station to determine when re-downloading of the table
might be useful."
::= { hrSWInstalled 1 }
hrSWInstalledLastUpdateTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the hrSWInstalledTable
was last completely updated. Because caching of this
data will be a popular implementation strategy,
retrieval of this object allows a management station
to obtain a guarantee that no data in this table is
older than the indicated time."
::= { hrSWInstalled 2 }
hrSWInstalledTable OBJECT-TYPE
SYNTAX SEQUENCE OF HrSWInstalledEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of software installed on this
host."
::= { hrSWInstalled 3 }
hrSWInstalledEntry OBJECT-TYPE
SYNTAX HrSWInstalledEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) entry for a piece of software
installed on this host.
As an example of how objects in this table are named,
an instance of the hrSWInstalledName object might be
named hrSWInstalledName.96"
INDEX { hrSWInstalledIndex }
::= { hrSWInstalledTable 1 }
HrSWInstalledEntry ::= SEQUENCE {
hrSWInstalledIndex Integer32,
hrSWInstalledName InternationalDisplayString,
hrSWInstalledID ProductID,
hrSWInstalledType INTEGER,
hrSWInstalledDate DateAndTime
}
hrSWInstalledIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each piece of software installed
on the host. This value shall be in the range from 1
to the number of pieces of software installed on the
host."
::= { hrSWInstalledEntry 1 }
hrSWInstalledName OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of this installed piece of
software, including the manufacturer, revision, the
name by which it is commonly known, and optionally,
its serial number."
::= { hrSWInstalledEntry 2 }
hrSWInstalledID OBJECT-TYPE
SYNTAX ProductID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product ID of this installed piece of software."
::= { hrSWInstalledEntry 3 }
hrSWInstalledType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
operatingSystem(2),
deviceDriver(3),
application(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this software."
::= { hrSWInstalledEntry 4 }
hrSWInstalledDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last-modification date of this application as it
would appear in a directory listing.
If this information is not known, then this variable
shall have the value corresponding to January 1, year
0000, 00:00:00.0, which is encoded as
(hex)'00 00 01 01 00 00 00 00'."
::= { hrSWInstalledEntry 5 }
-- Conformance information
hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }
hrMIBGroups OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }
-- Compliance Statements
hrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The requirements for conformance to the Host Resources MIB."
MODULE -- this module
MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup,
hrDeviceGroup }
OBJECT hrSystemDate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hrSystemInitialLoadDevice
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hrSystemInitialLoadParameters
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hrStorageSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hrFSLastFullBackupDate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hrFSLastPartialBackupDate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP hrSWRunGroup
DESCRIPTION
"The Running Software Group. Implementation
of this group is mandatory only when the
hrSWRunPerfGroup is implemented."
OBJECT hrSWRunStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP hrSWRunPerfGroup
DESCRIPTION
"The Running Software Performance Group.
Implementation of this group is at the discretion
of the implementor."
GROUP hrSWInstalledGroup
DESCRIPTION
"The Installed Software Group.
Implementation of this group is at the discretion
of the implementor."
::= { hrMIBCompliances 1 }
hrSystemGroup OBJECT-GROUP
OBJECTS {
hrSystemUptime, hrSystemDate,
hrSystemInitialLoadDevice,
hrSystemInitialLoadParameters,
hrSystemNumUsers, hrSystemProcesses,
hrSystemMaxProcesses
}
STATUS current
DESCRIPTION
"The Host Resources System Group."
::= { hrMIBGroups 1 }
hrStorageGroup OBJECT-GROUP
OBJECTS {
hrMemorySize, hrStorageIndex, hrStorageType,
hrStorageDescr, hrStorageAllocationUnits,
hrStorageSize, hrStorageUsed,
hrStorageAllocationFailures
}
STATUS current
DESCRIPTION
"The Host Resources Storage Group."
::= { hrMIBGroups 2 }
hrDeviceGroup OBJECT-GROUP
OBJECTS {
hrDeviceIndex, hrDeviceType, hrDeviceDescr,
hrDeviceID, hrDeviceStatus, hrDeviceErrors,
hrProcessorFrwID, hrProcessorLoad,
hrNetworkIfIndex, hrPrinterStatus,
hrPrinterDetectedErrorState,
hrDiskStorageAccess, hrDiskStorageMedia,
hrDiskStorageRemoveble, hrDiskStorageCapacity,
hrPartitionIndex, hrPartitionLabel,
hrPartitionID, hrPartitionSize,
hrPartitionFSIndex, hrFSIndex, hrFSMountPoint,
hrFSRemoteMountPoint, hrFSType, hrFSAccess,
hrFSBootable, hrFSStorageIndex,
hrFSLastFullBackupDate,
hrFSLastPartialBackupDate
}
STATUS current
DESCRIPTION
"The Host Resources Device Group."
::= { hrMIBGroups 3 }
hrSWRunGroup OBJECT-GROUP
OBJECTS {
hrSWOSIndex, hrSWRunIndex, hrSWRunName,
hrSWRunID, hrSWRunPath, hrSWRunParameters,
hrSWRunType, hrSWRunStatus
}
STATUS current
DESCRIPTION
"The Host Resources Running Software Group."
::= { hrMIBGroups 4 }
hrSWRunPerfGroup OBJECT-GROUP
OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem }
STATUS current
DESCRIPTION
"The Host Resources Running Software
Performance Group."
::= { hrMIBGroups 5 }
hrSWInstalledGroup OBJECT-GROUP
OBJECTS {
hrSWInstalledLastChange,
hrSWInstalledLastUpdateTime,
hrSWInstalledIndex, hrSWInstalledName,
hrSWInstalledID, hrSWInstalledType,
hrSWInstalledDate
}
STATUS current
DESCRIPTION
"The Host Resources Installed Software Group."
::= { hrMIBGroups 6 }
END
Zerion Mini Shell 1.0