Mini Shell
"""
Module for running ZFS zpool command
:codeauthor: Nitin Madhok <nmadhok@g.clemson.edu>, Jorge Schrauwen <sjorge@blackdot.be>
:maintainer: Jorge Schrauwen <sjorge@blackdot.be>
:maturity: new
:depends: salt.utils.zfs
:platform: illumos,freebsd,linux
.. versionchanged:: 2018.3.1
Big refactor to remove duplicate code, better type conversions and improved
consistency in output.
"""
import logging
import os
import salt.utils.decorators
import salt.utils.decorators.path
import salt.utils.path
from salt.utils.odict import OrderedDict
log = logging.getLogger(__name__)
__virtualname__ = "zpool"
__func_alias__ = {
"import_": "import",
"list_": "list",
}
def __virtual__():
"""
Only load when the platform has zfs support
"""
if __grains__.get("zfs_support"):
return __virtualname__
else:
return False, "The zpool module cannot be loaded: zfs not supported"
def _clean_vdev_config(config):
"""
Return a simple vdev tree from zpool.status' config section
"""
cln_config = OrderedDict()
for label, sub_config in config.items():
if label not in ["state", "read", "write", "cksum"]:
sub_config = _clean_vdev_config(sub_config)
if sub_config and isinstance(cln_config, list):
cln_config.append(OrderedDict([(label, sub_config)]))
elif sub_config and isinstance(cln_config, OrderedDict):
cln_config[label] = sub_config
elif isinstance(cln_config, list):
cln_config.append(label)
elif isinstance(cln_config, OrderedDict):
new_config = []
for old_label, old_config in cln_config.items():
new_config.append(OrderedDict([(old_label, old_config)]))
new_config.append(label)
cln_config = new_config
else:
cln_config = [label]
return cln_config
def healthy():
"""
Check if all zpools are healthy
.. versionadded:: 2016.3.0
CLI Example:
.. code-block:: bash
salt '*' zpool.healthy
"""
## collect status output
# NOTE: we pass the -x flag, by doing this
# we will get 'all pools are healthy' on stdout
# if all pools are healthy, otherwise we will get
# the same output that we expect from zpool status
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"]("status", flags=["-x"]),
python_shell=False,
)
return res["stdout"] == "all pools are healthy"
def status(zpool=None):
"""
Return the status of the named zpool
zpool : string
optional name of storage pool
.. versionadded:: 2016.3.0
CLI Example:
.. code-block:: bash
salt '*' zpool.status myzpool
"""
ret = OrderedDict()
## collect status output
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"]("status", target=zpool),
python_shell=False,
)
if res["retcode"] != 0:
return __utils__["zfs.parse_command_result"](res)
# NOTE: command output for reference
# =====================================================================
# pool: data
# state: ONLINE
# scan: scrub repaired 0 in 2h27m with 0 errors on Mon Jan 8 03:27:25 2018
# config:
#
# NAME STATE READ WRITE CKSUM
# data ONLINE 0 0 0
# mirror-0 ONLINE 0 0 0
# c0tXXXXCXXXXXXXXXXXd0 ONLINE 0 0 0
# c0tXXXXCXXXXXXXXXXXd0 ONLINE 0 0 0
# c0tXXXXCXXXXXXXXXXXd0 ONLINE 0 0 0
#
# errors: No known data errors
# =====================================================================
## parse status output
# NOTE: output is 'key: value' except for the 'config' key.
# multiple pools will repeat the output, so if switch pools if
# we see 'pool:'
current_pool = None
current_prop = None
for zpd in res["stdout"].splitlines():
if zpd.strip() == "":
continue
if ":" in zpd and zpd[0] != "\t":
# NOTE: line is 'key: value' format, we just update a dict
prop = zpd.split(":")[0].strip()
value = ":".join(zpd.split(":")[1:]).strip()
if prop == "pool" and current_pool != value:
current_pool = value
ret[current_pool] = OrderedDict()
if prop != "pool":
ret[current_pool][prop] = value
current_prop = prop
else:
# NOTE: we append the line output to the last property
# this should only happens once we hit the config
# section
ret[current_pool][current_prop] = "{}\n{}".format(
ret[current_pool][current_prop], zpd
)
## parse config property for each pool
# NOTE: the config property has some structured data
# sadly this data is in a different format than
# the rest and it needs further processing
for pool in ret:
if "config" not in ret[pool]:
continue
header = None
root_vdev = None
vdev = None
dev = None
rdev = None
config = ret[pool]["config"]
config_data = OrderedDict()
for line in config.splitlines():
# NOTE: the first line is the header
# we grab all the none whitespace values
if not header:
header = line.strip().lower()
header = [x for x in header.split(" ") if x not in [""]]
continue
# NOTE: data is indented by 1 tab, then multiples of 2 spaces
# to differential root vdev, vdev, and dev
#
# we just strip the initial tab (can't use .strip() here)
if line[0] == "\t":
line = line[1:]
# NOTE: transform data into dict
stat_data = OrderedDict(
list(
zip(
header,
[x for x in line.strip().split(" ") if x not in [""]],
)
)
)
# NOTE: decode the zfs values properly
stat_data = __utils__["zfs.from_auto_dict"](stat_data)
# NOTE: store stat_data in the proper location
if line.startswith(" " * 6):
rdev = stat_data["name"]
config_data[root_vdev][vdev][dev][rdev] = stat_data
elif line.startswith(" " * 4):
rdev = None
dev = stat_data["name"]
config_data[root_vdev][vdev][dev] = stat_data
elif line.startswith(" " * 2):
rdev = dev = None
vdev = stat_data["name"]
config_data[root_vdev][vdev] = stat_data
else:
rdev = dev = vdev = None
root_vdev = stat_data["name"]
config_data[root_vdev] = stat_data
# NOTE: name already used as identifier, drop duplicate data
del stat_data["name"]
ret[pool]["config"] = config_data
return ret
def iostat(zpool=None, sample_time=5, parsable=True):
"""
Display I/O statistics for the given pools
zpool : string
optional name of storage pool
sample_time : int
seconds to capture data before output
default a sample of 5 seconds is used
parsable : boolean
display data in pythonc values (True, False, Bytes,...)
.. versionadded:: 2016.3.0
.. versionchanged:: 2018.3.1
Added ```parsable``` parameter that defaults to True
CLI Example:
.. code-block:: bash
salt '*' zpool.iostat myzpool
"""
ret = OrderedDict()
## get iostat output
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="iostat", flags=["-v"], target=[zpool, sample_time, 2]
),
python_shell=False,
)
if res["retcode"] != 0:
return __utils__["zfs.parse_command_result"](res)
# NOTE: command output for reference
# =====================================================================
# capacity operations bandwidth
# pool alloc free read write read write
# ------------------------- ----- ----- ----- ----- ----- -----
# mypool 648G 1.18T 10 6 1.30M 817K
# mirror 648G 1.18T 10 6 1.30M 817K
# c0tXXXXCXXXXXXXXXXXd0 - - 9 5 1.29M 817K
# c0tXXXXCXXXXXXXXXXXd0 - - 9 5 1.29M 817K
# c0tXXXXCXXXXXXXXXXXd0 - - 9 5 1.29M 817K
# ------------------------- ----- ----- ----- ----- ----- -----
# =====================================================================
## parse iostat output
# NOTE: hardcode the header
# the double header line is hard to parse, we opt to
# hardcode the header fields
header = [
"name",
"capacity-alloc",
"capacity-free",
"operations-read",
"operations-write",
"bandwidth-read",
"bandwidth-write",
]
root_vdev = None
vdev = None
dev = None
current_data = OrderedDict()
for line in res["stdout"].splitlines():
# NOTE: skip header
if line.strip() == "" or line.strip().split()[-1] in ["write", "bandwidth"]:
continue
# NOTE: reset pool on line separator
if line.startswith("-") and line.endswith("-"):
ret.update(current_data)
current_data = OrderedDict()
continue
# NOTE: transform data into dict
io_data = OrderedDict(
list(
zip(
header,
[x for x in line.strip().split(" ") if x not in [""]],
)
)
)
# NOTE: normalize values
if parsable:
# NOTE: raw numbers and pythonic types
io_data = __utils__["zfs.from_auto_dict"](io_data)
else:
# NOTE: human readable zfs types
io_data = __utils__["zfs.to_auto_dict"](io_data)
# NOTE: store io_data in the proper location
if line.startswith(" " * 4):
dev = io_data["name"]
current_data[root_vdev][vdev][dev] = io_data
elif line.startswith(" " * 2):
dev = None
vdev = io_data["name"]
current_data[root_vdev][vdev] = io_data
else:
dev = vdev = None
root_vdev = io_data["name"]
current_data[root_vdev] = io_data
# NOTE: name already used as identifier, drop duplicate data
del io_data["name"]
return ret
def list_(properties="size,alloc,free,cap,frag,health", zpool=None, parsable=True):
"""
.. versionadded:: 2015.5.0
Return information about (all) storage pools
zpool : string
optional name of storage pool
properties : string
comma-separated list of properties to list
parsable : boolean
display numbers in parsable (exact) values
.. versionadded:: 2018.3.0
.. note::
The ``name`` property will always be included, while the ``frag``
property will get removed if not available
zpool : string
optional zpool
.. note::
Multiple storage pool can be provided as a space separated list
CLI Example:
.. code-block:: bash
salt '*' zpool.list
salt '*' zpool.list zpool=tank
salt '*' zpool.list 'size,free'
salt '*' zpool.list 'size,free' tank
"""
ret = OrderedDict()
## update properties
# NOTE: properties should be a list
if not isinstance(properties, list):
properties = properties.split(",")
# NOTE: name should be first property
while "name" in properties:
properties.remove("name")
properties.insert(0, "name")
# NOTE: remove 'frags' if we don't have feature flags
if not __utils__["zfs.has_feature_flags"]():
while "frag" in properties:
properties.remove("frag")
## collect list output
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="list",
flags=["-H"],
opts={"-o": ",".join(properties)},
target=zpool,
),
python_shell=False,
)
if res["retcode"] != 0:
return __utils__["zfs.parse_command_result"](res)
# NOTE: command output for reference
# ========================================================================
# data 1992864825344 695955501056 1296909324288 34 11% ONLINE
# =========================================================================
## parse list output
for line in res["stdout"].splitlines():
# NOTE: transform data into dict
zpool_data = OrderedDict(
list(
zip(
properties,
line.strip().split("\t"),
)
)
)
# NOTE: normalize values
if parsable:
# NOTE: raw numbers and pythonic types
zpool_data = __utils__["zfs.from_auto_dict"](zpool_data)
else:
# NOTE: human readable zfs types
zpool_data = __utils__["zfs.to_auto_dict"](zpool_data)
ret[zpool_data["name"]] = zpool_data
del ret[zpool_data["name"]]["name"]
return ret
def get(zpool, prop=None, show_source=False, parsable=True):
"""
.. versionadded:: 2016.3.0
Retrieves the given list of properties
zpool : string
Name of storage pool
prop : string
Optional name of property to retrieve
show_source : boolean
Show source of property
parsable : boolean
Display numbers in parsable (exact) values
.. versionadded:: 2018.3.0
CLI Example:
.. code-block:: bash
salt '*' zpool.get myzpool
"""
ret = OrderedDict()
value_properties = ["name", "property", "value", "source"]
## collect get output
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="get",
flags=["-H"],
property_name=prop if prop else "all",
target=zpool,
),
python_shell=False,
)
if res["retcode"] != 0:
return __utils__["zfs.parse_command_result"](res)
# NOTE: command output for reference
# ========================================================================
# ...
# data mountpoint /data local
# data compression off default
# ...
# =========================================================================
# parse get output
for line in res["stdout"].splitlines():
# NOTE: transform data into dict
prop_data = OrderedDict(
list(
zip(
value_properties,
[x for x in line.strip().split("\t") if x not in [""]],
)
)
)
# NOTE: older zfs does not have -o, fall back to manually stipping the name field
del prop_data["name"]
# NOTE: normalize values
if parsable:
# NOTE: raw numbers and pythonic types
prop_data["value"] = __utils__["zfs.from_auto"](
prop_data["property"], prop_data["value"]
)
else:
# NOTE: human readable zfs types
prop_data["value"] = __utils__["zfs.to_auto"](
prop_data["property"], prop_data["value"]
)
# NOTE: show source if requested
if show_source:
ret[prop_data["property"]] = prop_data
del ret[prop_data["property"]]["property"]
else:
ret[prop_data["property"]] = prop_data["value"]
return ret
def set(zpool, prop, value):
"""
Sets the given property on the specified pool
zpool : string
Name of storage pool
prop : string
Name of property to set
value : string
Value to set for the specified property
.. versionadded:: 2016.3.0
CLI Example:
.. code-block:: bash
salt '*' zpool.set myzpool readonly yes
"""
ret = OrderedDict()
# set property
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="set",
property_name=prop,
property_value=value,
target=zpool,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "set")
def exists(zpool):
"""
Check if a ZFS storage pool is active
zpool : string
Name of storage pool
CLI Example:
.. code-block:: bash
salt '*' zpool.exists myzpool
"""
# list for zpool
# NOTE: retcode > 0 if zpool does not exists
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="list",
target=zpool,
),
python_shell=False,
ignore_retcode=True,
)
return res["retcode"] == 0
def destroy(zpool, force=False):
"""
Destroys a storage pool
zpool : string
Name of storage pool
force : boolean
Force destroy of pool
CLI Example:
.. code-block:: bash
salt '*' zpool.destroy myzpool
"""
# destroy zpool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="destroy",
flags=["-f"] if force else None,
target=zpool,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "destroyed")
def scrub(zpool, stop=False, pause=False):
"""
Scrub a storage pool
zpool : string
Name of storage pool
stop : boolean
If ``True``, cancel ongoing scrub
pause : boolean
If ``True``, pause ongoing scrub
.. versionadded:: 2018.3.0
.. note::
Pause is only available on recent versions of ZFS.
If both ``pause`` and ``stop`` are ``True``, then ``stop`` will
win.
CLI Example:
.. code-block:: bash
salt '*' zpool.scrub myzpool
"""
## select correct action
if stop:
action = ["-s"]
elif pause:
action = ["-p"]
else:
action = None
## Scrub storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="scrub",
flags=action,
target=zpool,
),
python_shell=False,
)
if res["retcode"] != 0:
return __utils__["zfs.parse_command_result"](res, "scrubbing")
ret = OrderedDict()
if stop or pause:
ret["scrubbing"] = False
else:
ret["scrubbing"] = True
return ret
def create(zpool, *vdevs, **kwargs):
"""
.. versionadded:: 2015.5.0
Create a simple zpool, a mirrored zpool, a zpool having nested VDEVs, a hybrid zpool with cache, spare and log drives or a zpool with RAIDZ-1, RAIDZ-2 or RAIDZ-3
zpool : string
Name of storage pool
vdevs : string
One or move devices
force : boolean
Forces use of vdevs, even if they appear in use or specify a
conflicting replication level.
mountpoint : string
Sets the mount point for the root dataset
altroot : string
Equivalent to "-o cachefile=none,altroot=root"
properties : dict
Additional pool properties
filesystem_properties : dict
Additional filesystem properties
createboot : boolean
create a boot partition
.. versionadded:: 2018.3.0
.. warning:
This is only available on illumos and Solaris
CLI Examples:
.. code-block:: bash
salt '*' zpool.create myzpool /path/to/vdev1 [...] [force=True|False]
salt '*' zpool.create myzpool mirror /path/to/vdev1 /path/to/vdev2 [...] [force=True|False]
salt '*' zpool.create myzpool raidz1 /path/to/vdev1 /path/to/vdev2 raidz2 /path/to/vdev3 /path/to/vdev4 /path/to/vdev5 [...] [force=True|False]
salt '*' zpool.create myzpool mirror /path/to/vdev1 [...] mirror /path/to/vdev2 /path/to/vdev3 [...] [force=True|False]
salt '*' zpool.create myhybridzpool mirror /tmp/file1 [...] log mirror /path/to/vdev1 [...] cache /path/to/vdev2 [...] spare /path/to/vdev3 [...] [force=True|False]
.. note::
Zpool properties can be specified at the time of creation of the pool
by passing an additional argument called "properties" and specifying
the properties with their respective values in the form of a python
dictionary:
.. code-block:: text
properties="{'property1': 'value1', 'property2': 'value2'}"
Filesystem properties can be specified at the time of creation of the
pool by passing an additional argument called "filesystem_properties"
and specifying the properties with their respective values in the form
of a python dictionary:
.. code-block:: text
filesystem_properties="{'property1': 'value1', 'property2': 'value2'}"
Example:
.. code-block:: bash
salt '*' zpool.create myzpool /path/to/vdev1 [...] properties="{'property1': 'value1', 'property2': 'value2'}"
CLI Example:
.. code-block:: bash
salt '*' zpool.create myzpool /path/to/vdev1 [...] [force=True|False]
salt '*' zpool.create myzpool mirror /path/to/vdev1 /path/to/vdev2 [...] [force=True|False]
salt '*' zpool.create myzpool raidz1 /path/to/vdev1 /path/to/vdev2 raidz2 /path/to/vdev3 /path/to/vdev4 /path/to/vdev5 [...] [force=True|False]
salt '*' zpool.create myzpool mirror /path/to/vdev1 [...] mirror /path/to/vdev2 /path/to/vdev3 [...] [force=True|False]
salt '*' zpool.create myhybridzpool mirror /tmp/file1 [...] log mirror /path/to/vdev1 [...] cache /path/to/vdev2 [...] spare /path/to/vdev3 [...] [force=True|False]
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
opts = {}
target = []
# NOTE: push pool and filesystem properties
pool_properties = kwargs.get("properties", {})
filesystem_properties = kwargs.get("filesystem_properties", {})
# NOTE: set extra config based on kwargs
if kwargs.get("force", False):
flags.append("-f")
if kwargs.get("createboot", False) or "bootsize" in pool_properties:
flags.append("-B")
if kwargs.get("altroot", False):
opts["-R"] = kwargs.get("altroot")
if kwargs.get("mountpoint", False):
opts["-m"] = kwargs.get("mountpoint")
# NOTE: append the pool name and specifications
target.append(zpool)
target.extend(vdevs)
## Create storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="create",
flags=flags,
opts=opts,
pool_properties=pool_properties,
filesystem_properties=filesystem_properties,
target=target,
),
python_shell=False,
)
ret = __utils__["zfs.parse_command_result"](res, "created")
if ret["created"]:
## NOTE: lookup zpool status for vdev config
ret["vdevs"] = _clean_vdev_config(
__salt__["zpool.status"](zpool=zpool)[zpool]["config"][zpool],
)
return ret
def add(zpool, *vdevs, **kwargs):
"""
Add the specified vdev\'s to the given storage pool
zpool : string
Name of storage pool
vdevs : string
One or more devices
force : boolean
Forces use of device
CLI Example:
.. code-block:: bash
salt '*' zpool.add myzpool /path/to/vdev1 /path/to/vdev2 [...]
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
target = []
# NOTE: set extra config based on kwargs
if kwargs.get("force", False):
flags.append("-f")
# NOTE: append the pool name and specifications
target.append(zpool)
target.extend(vdevs)
## Update storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="add",
flags=flags,
target=target,
),
python_shell=False,
)
ret = __utils__["zfs.parse_command_result"](res, "added")
if ret["added"]:
## NOTE: lookup zpool status for vdev config
ret["vdevs"] = _clean_vdev_config(
__salt__["zpool.status"](zpool=zpool)[zpool]["config"][zpool],
)
return ret
def attach(zpool, device, new_device, force=False):
"""
Attach specified device to zpool
zpool : string
Name of storage pool
device : string
Existing device name too
new_device : string
New device name (to be attached to ``device``)
force : boolean
Forces use of device
CLI Example:
.. code-block:: bash
salt '*' zpool.attach myzpool /path/to/vdev1 /path/to/vdev2 [...]
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
target = []
# NOTE: set extra config
if force:
flags.append("-f")
# NOTE: append the pool name and specifications
target.append(zpool)
target.append(device)
target.append(new_device)
## Update storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="attach",
flags=flags,
target=target,
),
python_shell=False,
)
ret = __utils__["zfs.parse_command_result"](res, "attached")
if ret["attached"]:
## NOTE: lookup zpool status for vdev config
ret["vdevs"] = _clean_vdev_config(
__salt__["zpool.status"](zpool=zpool)[zpool]["config"][zpool],
)
return ret
def detach(zpool, device):
"""
Detach specified device to zpool
zpool : string
Name of storage pool
device : string
Device to detach
CLI Example:
.. code-block:: bash
salt '*' zpool.detach myzpool /path/to/vdev1
"""
## Update storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="detach",
target=[zpool, device],
),
python_shell=False,
)
ret = __utils__["zfs.parse_command_result"](res, "detatched")
if ret["detatched"]:
## NOTE: lookup zpool status for vdev config
ret["vdevs"] = _clean_vdev_config(
__salt__["zpool.status"](zpool=zpool)[zpool]["config"][zpool],
)
return ret
def split(zpool, newzpool, **kwargs):
"""
.. versionadded:: 2018.3.0
Splits devices off pool creating newpool.
.. note::
All vdevs in pool must be mirrors. At the time of the split,
``newzpool`` will be a replica of ``zpool``.
After splitting, do not forget to import the new pool!
zpool : string
Name of storage pool
newzpool : string
Name of new storage pool
mountpoint : string
Sets the mount point for the root dataset
altroot : string
Sets altroot for newzpool
properties : dict
Additional pool properties for newzpool
CLI Examples:
.. code-block:: bash
salt '*' zpool.split datamirror databackup
salt '*' zpool.split datamirror databackup altroot=/backup
.. note::
Zpool properties can be specified at the time of creation of the pool
by passing an additional argument called "properties" and specifying
the properties with their respective values in the form of a python
dictionary:
.. code-block:: text
properties="{'property1': 'value1', 'property2': 'value2'}"
Example:
.. code-block:: bash
salt '*' zpool.split datamirror databackup properties="{'readonly': 'on'}"
CLI Example:
.. code-block:: bash
salt '*' zpool.split datamirror databackup
salt '*' zpool.split datamirror databackup altroot=/backup
"""
## Configure pool
# NOTE: initialize the defaults
opts = {}
# NOTE: push pool and filesystem properties
pool_properties = kwargs.get("properties", {})
# NOTE: set extra config based on kwargs
if kwargs.get("altroot", False):
opts["-R"] = kwargs.get("altroot")
## Split storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="split",
opts=opts,
pool_properties=pool_properties,
target=[zpool, newzpool],
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "split")
def replace(zpool, old_device, new_device=None, force=False):
"""
Replaces ``old_device`` with ``new_device``
.. note::
This is equivalent to attaching ``new_device``,
waiting for it to resilver, and then detaching ``old_device``.
The size of ``new_device`` must be greater than or equal to the minimum
size of all the devices in a mirror or raidz configuration.
zpool : string
Name of storage pool
old_device : string
Old device to replace
new_device : string
Optional new device
force : boolean
Forces use of new_device, even if its appears to be in use.
CLI Example:
.. code-block:: bash
salt '*' zpool.replace myzpool /path/to/vdev1 /path/to/vdev2
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
target = []
# NOTE: set extra config
if force:
flags.append("-f")
# NOTE: append the pool name and specifications
target.append(zpool)
target.append(old_device)
if new_device:
target.append(new_device)
## Replace device
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="replace",
flags=flags,
target=target,
),
python_shell=False,
)
ret = __utils__["zfs.parse_command_result"](res, "replaced")
if ret["replaced"]:
## NOTE: lookup zpool status for vdev config
ret["vdevs"] = _clean_vdev_config(
__salt__["zpool.status"](zpool=zpool)[zpool]["config"][zpool],
)
return ret
@salt.utils.decorators.path.which("mkfile")
def create_file_vdev(size, *vdevs):
"""
Creates file based virtual devices for a zpool
CLI Example:
.. code-block:: bash
salt '*' zpool.create_file_vdev 7G /path/to/vdev1 [/path/to/vdev2] [...]
.. note::
Depending on file size, the above command may take a while to return.
"""
ret = OrderedDict()
err = OrderedDict()
_mkfile_cmd = salt.utils.path.which("mkfile")
for vdev in vdevs:
if os.path.isfile(vdev):
ret[vdev] = "existed"
else:
res = __salt__["cmd.run_all"](
"{mkfile} {size} {vdev}".format(
mkfile=_mkfile_cmd,
size=size,
vdev=vdev,
),
python_shell=False,
)
if res["retcode"] != 0:
if "stderr" in res and ":" in res["stderr"]:
ret[vdev] = "failed"
err[vdev] = ":".join(res["stderr"].strip().split(":")[1:])
else:
ret[vdev] = "created"
if err:
ret["error"] = err
return ret
def export(*pools, **kwargs):
"""
.. versionadded:: 2015.5.0
Export storage pools
pools : string
One or more storage pools to export
force : boolean
Force export of storage pools
CLI Example:
.. code-block:: bash
salt '*' zpool.export myzpool ... [force=True|False]
salt '*' zpool.export myzpool2 myzpool2 ... [force=True|False]
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
targets = []
# NOTE: set extra config based on kwargs
if kwargs.get("force", False):
flags.append("-f")
# NOTE: append the pool name and specifications
targets = list(pools)
## Export pools
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="export",
flags=flags,
target=targets,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "exported")
def import_(zpool=None, new_name=None, **kwargs):
"""
.. versionadded:: 2015.5.0
Import storage pools or list pools available for import
zpool : string
Optional name of storage pool
new_name : string
Optional new name for the storage pool
mntopts : string
Comma-separated list of mount options to use when mounting datasets
within the pool.
force : boolean
Forces import, even if the pool appears to be potentially active.
altroot : string
Equivalent to "-o cachefile=none,altroot=root"
dir : string
Searches for devices or files in dir, multiple dirs can be specified as
follows: ``dir="dir1,dir2"``
no_mount : boolean
Import the pool without mounting any file systems.
only_destroyed : boolean
Imports destroyed pools only. This also sets ``force=True``.
recovery : bool|str
false: do not try to recovery broken pools
true: try to recovery the pool by rolling back the latest transactions
test: check if a pool can be recovered, but don't import it
nolog: allow import without log device, recent transactions might be lost
.. note::
If feature flags are not support this forced to the default of 'false'
.. warning::
When recovery is set to 'test' the result will be have imported set to True if the pool
can be imported. The pool might also be imported if the pool was not broken to begin with.
properties : dict
Additional pool properties
.. note::
Zpool properties can be specified at the time of creation of the pool
by passing an additional argument called "properties" and specifying
the properties with their respective values in the form of a python
dictionary:
.. code-block:: text
properties="{'property1': 'value1', 'property2': 'value2'}"
CLI Example:
.. code-block:: bash
salt '*' zpool.import [force=True|False]
salt '*' zpool.import myzpool [mynewzpool] [force=True|False]
salt '*' zpool.import myzpool dir='/tmp'
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
opts = {}
target = []
# NOTE: push pool and filesystem properties
pool_properties = kwargs.get("properties", {})
# NOTE: set extra config based on kwargs
if kwargs.get("force", False) or kwargs.get("only_destroyed", False):
flags.append("-f")
if kwargs.get("only_destroyed", False):
flags.append("-D")
if kwargs.get("no_mount", False):
flags.append("-N")
if kwargs.get("altroot", False):
opts["-R"] = kwargs.get("altroot")
if kwargs.get("mntopts", False):
# NOTE: -o is used for both mount options and pool properties!
# ```-o nodevices,noexec,nosetuid,ro``` vs ```-o prop=val```
opts["-o"] = kwargs.get("mntopts")
if kwargs.get("dir", False):
opts["-d"] = kwargs.get("dir").split(",")
if kwargs.get("recovery", False) and __utils__["zfs.has_feature_flags"]():
recovery = kwargs.get("recovery")
if recovery in [True, "test"]:
flags.append("-F")
if recovery == "test":
flags.append("-n")
if recovery == "nolog":
flags.append("-m")
# NOTE: append the pool name and specifications
if zpool:
target.append(zpool)
target.append(new_name)
else:
flags.append("-a")
## Import storage pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="import",
flags=flags,
opts=opts,
pool_properties=pool_properties,
target=target,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "imported")
def online(zpool, *vdevs, **kwargs):
"""
.. versionadded:: 2015.5.0
Ensure that the specified devices are online
zpool : string
name of storage pool
vdevs : string
one or more devices
expand : boolean
Expand the device to use all available space.
.. note::
If the device is part of a mirror or raidz then all devices must be
expanded before the new space will become available to the pool.
CLI Example:
.. code-block:: bash
salt '*' zpool.online myzpool /path/to/vdev1 [...]
"""
## Configure pool
# default options
flags = []
target = []
# set flags and options
if kwargs.get("expand", False):
flags.append("-e")
target.append(zpool)
if vdevs:
target.extend(vdevs)
## Configure pool
# NOTE: initialize the defaults
flags = []
target = []
# NOTE: set extra config based on kwargs
if kwargs.get("expand", False):
flags.append("-e")
# NOTE: append the pool name and specifications
target.append(zpool)
target.extend(vdevs)
## Bring online device
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="online",
flags=flags,
target=target,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "onlined")
def offline(zpool, *vdevs, **kwargs):
"""
.. versionadded:: 2015.5.0
Ensure that the specified devices are offline
.. warning::
By default, the ``OFFLINE`` state is persistent. The device remains
offline when the system is rebooted. To temporarily take a device
offline, use ``temporary=True``.
zpool : string
name of storage pool
vdevs : string
One or more devices
temporary : boolean
Enable temporarily offline
CLI Example:
.. code-block:: bash
salt '*' zpool.offline myzpool /path/to/vdev1 [...] [temporary=True|False]
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
target = []
# NOTE: set extra config based on kwargs
if kwargs.get("temporary", False):
flags.append("-t")
# NOTE: append the pool name and specifications
target.append(zpool)
target.extend(vdevs)
## Take a device offline
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="offline",
flags=flags,
target=target,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "offlined")
def labelclear(device, force=False):
"""
.. versionadded:: 2018.3.0
Removes ZFS label information from the specified device
device : string
Device name; must not be part of an active pool configuration.
force : boolean
Treat exported or foreign devices as inactive
CLI Example:
.. code-block:: bash
salt '*' zpool.labelclear /path/to/dev
"""
## clear label for all specified device
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="labelclear",
flags=["-f"] if force else None,
target=device,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "labelcleared")
def clear(zpool, device=None):
"""
Clears device errors in a pool.
.. warning::
The device must not be part of an active pool configuration.
zpool : string
name of storage pool
device : string
(optional) specific device to clear
.. versionadded:: 2018.3.1
CLI Example:
.. code-block:: bash
salt '*' zpool.clear mypool
salt '*' zpool.clear mypool /path/to/dev
"""
## Configure pool
# NOTE: initialize the defaults
target = []
# NOTE: append the pool name and specifications
target.append(zpool)
target.append(device)
## clear storage pool errors
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="clear",
target=target,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "cleared")
def reguid(zpool):
"""
Generates a new unique identifier for the pool
.. warning::
You must ensure that all devices in this pool are online and healthy
before performing this action.
zpool : string
name of storage pool
.. versionadded:: 2016.3.0
CLI Example:
.. code-block:: bash
salt '*' zpool.reguid myzpool
"""
## generate new GUID for pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="reguid",
target=zpool,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "reguided")
def reopen(zpool):
"""
Reopen all the vdevs associated with the pool
zpool : string
name of storage pool
.. versionadded:: 2016.3.0
CLI Example:
.. code-block:: bash
salt '*' zpool.reopen myzpool
"""
## reopen all devices fro pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="reopen",
target=zpool,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "reopened")
def upgrade(zpool=None, version=None):
"""
.. versionadded:: 2016.3.0
Enables all supported features on the given pool
zpool : string
Optional storage pool, applies to all otherwize
version : int
Version to upgrade to, if unspecified upgrade to the highest possible
.. warning::
Once this is done, the pool will no longer be accessible on systems that do not
support feature flags. See zpool-features(5) for details on compatibility with
systems that support feature flags, but do not support all features enabled on the pool.
CLI Example:
.. code-block:: bash
salt '*' zpool.upgrade myzpool
"""
## Configure pool
# NOTE: initialize the defaults
flags = []
opts = {}
# NOTE: set extra config
if version:
opts["-V"] = version
if not zpool:
flags.append("-a")
## Upgrade pool
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="upgrade",
flags=flags,
opts=opts,
target=zpool,
),
python_shell=False,
)
return __utils__["zfs.parse_command_result"](res, "upgraded")
def history(zpool=None, internal=False, verbose=False):
"""
.. versionadded:: 2016.3.0
Displays the command history of the specified pools, or all pools if no
pool is specified
zpool : string
Optional storage pool
internal : boolean
Toggle display of internally logged ZFS events
verbose : boolean
Toggle display of the user name, the hostname, and the zone in which
the operation was performed
CLI Example:
.. code-block:: bash
salt '*' zpool.upgrade myzpool
"""
ret = OrderedDict()
## Configure pool
# NOTE: initialize the defaults
flags = []
# NOTE: set extra config
if verbose:
flags.append("-l")
if internal:
flags.append("-i")
## Lookup history
res = __salt__["cmd.run_all"](
__utils__["zfs.zpool_command"](
command="history",
flags=flags,
target=zpool,
),
python_shell=False,
)
if res["retcode"] != 0:
return __utils__["zfs.parse_command_result"](res)
else:
pool = "unknown"
for line in res["stdout"].splitlines():
if line.startswith("History for"):
pool = line[13:-2]
ret[pool] = OrderedDict()
else:
if line == "":
continue
log_timestamp = line[0:19]
log_command = line[20:]
ret[pool][log_timestamp] = log_command
return ret
Zerion Mini Shell 1.0