Mini Shell
# Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"). You
# may not use this file except in compliance with the License. A copy of
# the License is located at
#
# http://aws.amazon.com/apache2.0/
#
# or in the "license" file accompanying this file. This file is
# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
# ANY KIND, either express or implied. See the License for the specific
# language governing permissions and limitations under the License.
import copy
from botocore.compat import OrderedDict
from botocore.endpoint import DEFAULT_TIMEOUT, MAX_POOL_CONNECTIONS
from botocore.exceptions import InvalidS3AddressingStyleError
from botocore.exceptions import InvalidRetryConfigurationError
from botocore.exceptions import InvalidMaxRetryAttemptsError
from botocore.exceptions import InvalidRetryModeError
class Config(object):
"""Advanced configuration for Botocore clients.
:type region_name: str
:param region_name: The region to use in instantiating the client
:type signature_version: str
:param signature_version: The signature version when signing requests.
:type user_agent: str
:param user_agent: The value to use in the User-Agent header.
:type user_agent_extra: str
:param user_agent_extra: The value to append to the current User-Agent
header value.
:type connect_timeout: float or int
:param connect_timeout: The time in seconds till a timeout exception is
thrown when attempting to make a connection. The default is 60
seconds.
:type read_timeout: float or int
:param read_timeout: The time in seconds till a timeout exception is
thrown when attempting to read from a connection. The default is
60 seconds.
:type parameter_validation: bool
:param parameter_validation: Whether parameter validation should occur
when serializing requests. The default is True. You can disable
parameter validation for performance reasons. Otherwise, it's
recommended to leave parameter validation enabled.
:type max_pool_connections: int
:param max_pool_connections: The maximum number of connections to
keep in a connection pool. If this value is not set, the default
value of 10 is used.
:type proxies: dict
:param proxies: A dictionary of proxy servers to use by protocol or
endpoint, e.g.:
{'http': 'foo.bar:3128', 'http://hostname': 'foo.bar:4012'}.
The proxies are used on each request.
:type proxies_config: dict
:param proxies_config: A dictionary of additional proxy configurations.
Valid keys are:
* 'proxy_ca_bundle' -- The path to a custom certificate bundle to use
when establishing SSL/TLS connections with proxy.
* 'proxy_client_cert' -- The path to a certificate for proxy
TLS client authentication.
When a str is provided it is treated as a path to a proxy client
certificate. When a two element tuple is provided, it will be
interpreted as the path to the client certificate, and the path
to the certificate key.
* 'proxy_use_forwarding_for_https' -- For HTTPS proxies,
forward your requests to HTTPS destinations with an absolute
URI. We strongly recommend you only use this option with
trusted or corporate proxies. Value must be boolean.
:type s3: dict
:param s3: A dictionary of s3 specific configurations.
Valid keys are:
* 'use_accelerate_endpoint' -- Refers to whether to use the S3
Accelerate endpoint. The value must be a boolean. If True, the
client will use the S3 Accelerate endpoint. If the S3 Accelerate
endpoint is being used then the addressing style will always
be virtual.
* 'payload_signing_enabled' -- Refers to whether or not to SHA256
sign sigv4 payloads. By default, this is disabled for streaming
uploads (UploadPart and PutObject).
* 'addressing_style' -- Refers to the style in which to address
s3 endpoints. Values must be a string that equals:
* auto -- Addressing style is chosen for user. Depending
on the configuration of client, the endpoint may be addressed in
the virtual or the path style. Note that this is the default
behavior if no style is specified.
* virtual -- Addressing style is always virtual. The name of the
bucket must be DNS compatible or an exception will be thrown.
Endpoints will be addressed as such: mybucket.s3.amazonaws.com
* path -- Addressing style is always by path. Endpoints will be
addressed as such: s3.amazonaws.com/mybucket
* 'us_east_1_regional_endpoint' - Refers to what S3 endpoint to use
when the region is configured to be us-east-1. Values must be a
string that equals:
* regional -- Use the us-east-1.amazonaws.com endpoint if the
client is configured to use the us-east-1 region.
* legacy -- Use the s3.amazonaws.com endpoint if the client is
configured to use the us-east-1 region. This is the default if
the configuration option is not specified.
:type retries: dict
:param retries: A dictionary for retry specific configurations.
Valid keys are:
* 'total_max_attempts' -- An integer representing the maximum number of
total attempts that will be made on a single request. This includes
the initial request, so a value of 1 indicates that no requests
will be retried. If ``total_max_attempts`` and ``max_attempts``
are both provided, ``total_max_attempts`` takes precedence.
``total_max_attempts`` is preferred over ``max_attempts`` because
it maps to the ``AWS_MAX_ATTEMPTS`` environment variable and
the ``max_attempts`` config file value.
* 'max_attempts' -- An integer representing the maximum number of
retry attempts that will be made on a single request. For
example, setting this value to 2 will result in the request
being retried at most two times after the initial request. Setting
this value to 0 will result in no retries ever being attempted on
the initial request. If not provided, the number of retries will
default to whatever is modeled, which is typically four retries.
* 'mode' -- A string representing the type of retry mode botocore
should use. Valid values are:
* ``legacy`` - The pre-existing retry behavior.
* ``standard`` - The standardized set of retry rules. This
will also default to 3 max attempts unless overridden.
* ``adaptive`` - Retries with additional client side throttling.
:type client_cert: str, (str, str)
:param client_cert: The path to a certificate for TLS client authentication.
When a str is provided it is treated as a path to a client certificate
to be used when creating a TLS connection.
If a client key is to be provided alongside the client certificate the
client_cert should be set to a tuple of length two where the first
element is the path to the client certificate and the second element is
the path to the certificate key.
:type inject_host_prefix: bool
:param inject_host_prefix: Whether host prefix injection should occur.
Defaults to True.
Setting this to False disables the injection of operation parameters
into the prefix of the hostname. This is useful for clients providing
custom endpoints that should not have their host prefix modified.
"""
OPTION_DEFAULTS = OrderedDict([
('region_name', None),
('signature_version', None),
('user_agent', None),
('user_agent_extra', None),
('connect_timeout', DEFAULT_TIMEOUT),
('read_timeout', DEFAULT_TIMEOUT),
('parameter_validation', True),
('max_pool_connections', MAX_POOL_CONNECTIONS),
('proxies', None),
('proxies_config', None),
('s3', None),
('retries', None),
('client_cert', None),
('inject_host_prefix', True),
('endpoint_discovery_enabled', None),
])
def __init__(self, *args, **kwargs):
self._user_provided_options = self._record_user_provided_options(
args, kwargs)
# Merge the user_provided options onto the default options
config_vars = copy.copy(self.OPTION_DEFAULTS)
config_vars.update(self._user_provided_options)
# Set the attributes based on the config_vars
for key, value in config_vars.items():
setattr(self, key, value)
# Validate the s3 options
self._validate_s3_configuration(self.s3)
self._validate_retry_configuration(self.retries)
def _record_user_provided_options(self, args, kwargs):
option_order = list(self.OPTION_DEFAULTS)
user_provided_options = {}
# Iterate through the kwargs passed through to the constructor and
# map valid keys to the dictionary
for key, value in kwargs.items():
if key in self.OPTION_DEFAULTS:
user_provided_options[key] = value
# The key must exist in the available options
else:
raise TypeError(
'Got unexpected keyword argument \'%s\'' % key)
# The number of args should not be longer than the allowed
# options
if len(args) > len(option_order):
raise TypeError(
'Takes at most %s arguments (%s given)' % (
len(option_order), len(args)))
# Iterate through the args passed through to the constructor and map
# them to appropriate keys.
for i, arg in enumerate(args):
# If it a kwarg was specified for the arg, then error out
if option_order[i] in user_provided_options:
raise TypeError(
'Got multiple values for keyword argument \'%s\'' % (
option_order[i]))
user_provided_options[option_order[i]] = arg
return user_provided_options
def _validate_s3_configuration(self, s3):
if s3 is not None:
addressing_style = s3.get('addressing_style')
if addressing_style not in ['virtual', 'auto', 'path', None]:
raise InvalidS3AddressingStyleError(
s3_addressing_style=addressing_style)
def _validate_retry_configuration(self, retries):
if retries is not None:
for key, value in retries.items():
if key not in ['max_attempts', 'mode', 'total_max_attempts']:
raise InvalidRetryConfigurationError(
retry_config_option=key)
if key == 'max_attempts' and value < 0:
raise InvalidMaxRetryAttemptsError(
provided_max_attempts=value,
min_value=0,
)
if key == 'total_max_attempts' and value < 1:
raise InvalidMaxRetryAttemptsError(
provided_max_attempts=value,
min_value=1,
)
if key == 'mode' and value not in ['legacy', 'standard',
'adaptive']:
raise InvalidRetryModeError(
provided_retry_mode=value
)
def merge(self, other_config):
"""Merges the config object with another config object
This will merge in all non-default values from the provided config
and return a new config object
:type other_config: botocore.config.Config
:param other config: Another config object to merge with. The values
in the provided config object will take precedence in the merging
:returns: A config object built from the merged values of both
config objects.
"""
# Make a copy of the current attributes in the config object.
config_options = copy.copy(self._user_provided_options)
# Merge in the user provided options from the other config
config_options.update(other_config._user_provided_options)
# Return a new config object with the merged properties.
return Config(**config_options)
Zerion Mini Shell 1.0