Mini Shell
#
# Copyright 2009 Facebook
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
"""Utility classes to write to and read from non-blocking files and sockets.
Contents:
* `BaseIOStream`: Generic interface for reading and writing.
* `IOStream`: Implementation of BaseIOStream using non-blocking sockets.
* `SSLIOStream`: SSL-aware version of IOStream.
* `PipeIOStream`: Pipe-based IOStream implementation.
"""
import asyncio
import collections
import errno
import io
import numbers
import os
import socket
import ssl
import sys
import re
from tornado.concurrent import Future, future_set_result_unless_cancelled
from tornado import ioloop
from tornado.log import gen_log
from tornado.netutil import ssl_wrap_socket, _client_ssl_defaults, _server_ssl_defaults
from tornado.util import errno_from_exception
import typing
from typing import (
Union,
Optional,
Awaitable,
Callable,
Pattern,
Any,
Dict,
TypeVar,
Tuple,
)
from types import TracebackType
if typing.TYPE_CHECKING:
from typing import Deque, List, Type # noqa: F401
_IOStreamType = TypeVar("_IOStreamType", bound="IOStream")
try:
from tornado.platform.posix import _set_nonblocking
except ImportError:
_set_nonblocking = None # type: ignore
# These errnos indicate that a non-blocking operation must be retried
# at a later time. On most platforms they're the same value, but on
# some they differ.
_ERRNO_WOULDBLOCK = (errno.EWOULDBLOCK, errno.EAGAIN)
if hasattr(errno, "WSAEWOULDBLOCK"):
_ERRNO_WOULDBLOCK += (errno.WSAEWOULDBLOCK,) # type: ignore
# These errnos indicate that a connection has been abruptly terminated.
# They should be caught and handled less noisily than other errors.
_ERRNO_CONNRESET = (errno.ECONNRESET, errno.ECONNABORTED, errno.EPIPE, errno.ETIMEDOUT)
if hasattr(errno, "WSAECONNRESET"):
_ERRNO_CONNRESET += ( # type: ignore
errno.WSAECONNRESET, # type: ignore
errno.WSAECONNABORTED, # type: ignore
errno.WSAETIMEDOUT, # type: ignore
)
if sys.platform == "darwin":
# OSX appears to have a race condition that causes send(2) to return
# EPROTOTYPE if called while a socket is being torn down:
# http://erickt.github.io/blog/2014/11/19/adventures-in-debugging-a-potential-osx-kernel-bug/
# Since the socket is being closed anyway, treat this as an ECONNRESET
# instead of an unexpected error.
_ERRNO_CONNRESET += (errno.EPROTOTYPE,) # type: ignore
# More non-portable errnos:
_ERRNO_INPROGRESS = (errno.EINPROGRESS,)
if hasattr(errno, "WSAEINPROGRESS"):
_ERRNO_INPROGRESS += (errno.WSAEINPROGRESS,) # type: ignore
_WINDOWS = sys.platform.startswith("win")
class StreamClosedError(IOError):
"""Exception raised by `IOStream` methods when the stream is closed.
Note that the close callback is scheduled to run *after* other
callbacks on the stream (to allow for buffered data to be processed),
so you may see this error before you see the close callback.
The ``real_error`` attribute contains the underlying error that caused
the stream to close (if any).
.. versionchanged:: 4.3
Added the ``real_error`` attribute.
"""
def __init__(self, real_error: BaseException = None) -> None:
super(StreamClosedError, self).__init__("Stream is closed")
self.real_error = real_error
class UnsatisfiableReadError(Exception):
"""Exception raised when a read cannot be satisfied.
Raised by ``read_until`` and ``read_until_regex`` with a ``max_bytes``
argument.
"""
pass
class StreamBufferFullError(Exception):
"""Exception raised by `IOStream` methods when the buffer is full.
"""
class _StreamBuffer(object):
"""
A specialized buffer that tries to avoid copies when large pieces
of data are encountered.
"""
def __init__(self) -> None:
# A sequence of (False, bytearray) and (True, memoryview) objects
self._buffers = (
collections.deque()
) # type: Deque[Tuple[bool, Union[bytearray, memoryview]]]
# Position in the first buffer
self._first_pos = 0
self._size = 0
def __len__(self) -> int:
return self._size
# Data above this size will be appended separately instead
# of extending an existing bytearray
_large_buf_threshold = 2048
def append(self, data: Union[bytes, bytearray, memoryview]) -> None:
"""
Append the given piece of data (should be a buffer-compatible object).
"""
size = len(data)
if size > self._large_buf_threshold:
if not isinstance(data, memoryview):
data = memoryview(data)
self._buffers.append((True, data))
elif size > 0:
if self._buffers:
is_memview, b = self._buffers[-1]
new_buf = is_memview or len(b) >= self._large_buf_threshold
else:
new_buf = True
if new_buf:
self._buffers.append((False, bytearray(data)))
else:
b += data # type: ignore
self._size += size
def peek(self, size: int) -> memoryview:
"""
Get a view over at most ``size`` bytes (possibly fewer) at the
current buffer position.
"""
assert size > 0
try:
is_memview, b = self._buffers[0]
except IndexError:
return memoryview(b"")
pos = self._first_pos
if is_memview:
return typing.cast(memoryview, b[pos : pos + size])
else:
return memoryview(b)[pos : pos + size]
def advance(self, size: int) -> None:
"""
Advance the current buffer position by ``size`` bytes.
"""
assert 0 < size <= self._size
self._size -= size
pos = self._first_pos
buffers = self._buffers
while buffers and size > 0:
is_large, b = buffers[0]
b_remain = len(b) - size - pos
if b_remain <= 0:
buffers.popleft()
size -= len(b) - pos
pos = 0
elif is_large:
pos += size
size = 0
else:
# Amortized O(1) shrink for Python 2
pos += size
if len(b) <= 2 * pos:
del typing.cast(bytearray, b)[:pos]
pos = 0
size = 0
assert size == 0
self._first_pos = pos
class BaseIOStream(object):
"""A utility class to write to and read from a non-blocking file or socket.
We support a non-blocking ``write()`` and a family of ``read_*()``
methods. When the operation completes, the ``Awaitable`` will resolve
with the data read (or ``None`` for ``write()``). All outstanding
``Awaitables`` will resolve with a `StreamClosedError` when the
stream is closed; `.BaseIOStream.set_close_callback` can also be used
to be notified of a closed stream.
When a stream is closed due to an error, the IOStream's ``error``
attribute contains the exception object.
Subclasses must implement `fileno`, `close_fd`, `write_to_fd`,
`read_from_fd`, and optionally `get_fd_error`.
"""
def __init__(
self,
max_buffer_size: int = None,
read_chunk_size: int = None,
max_write_buffer_size: int = None,
) -> None:
"""`BaseIOStream` constructor.
:arg max_buffer_size: Maximum amount of incoming data to buffer;
defaults to 100MB.
:arg read_chunk_size: Amount of data to read at one time from the
underlying transport; defaults to 64KB.
:arg max_write_buffer_size: Amount of outgoing data to buffer;
defaults to unlimited.
.. versionchanged:: 4.0
Add the ``max_write_buffer_size`` parameter. Changed default
``read_chunk_size`` to 64KB.
.. versionchanged:: 5.0
The ``io_loop`` argument (deprecated since version 4.1) has been
removed.
"""
self.io_loop = ioloop.IOLoop.current()
self.max_buffer_size = max_buffer_size or 104857600
# A chunk size that is too close to max_buffer_size can cause
# spurious failures.
self.read_chunk_size = min(read_chunk_size or 65536, self.max_buffer_size // 2)
self.max_write_buffer_size = max_write_buffer_size
self.error = None # type: Optional[BaseException]
self._read_buffer = bytearray()
self._read_buffer_pos = 0
self._read_buffer_size = 0
self._user_read_buffer = False
self._after_user_read_buffer = None # type: Optional[bytearray]
self._write_buffer = _StreamBuffer()
self._total_write_index = 0
self._total_write_done_index = 0
self._read_delimiter = None # type: Optional[bytes]
self._read_regex = None # type: Optional[Pattern]
self._read_max_bytes = None # type: Optional[int]
self._read_bytes = None # type: Optional[int]
self._read_partial = False
self._read_until_close = False
self._read_future = None # type: Optional[Future]
self._write_futures = (
collections.deque()
) # type: Deque[Tuple[int, Future[None]]]
self._close_callback = None # type: Optional[Callable[[], None]]
self._connect_future = None # type: Optional[Future[IOStream]]
# _ssl_connect_future should be defined in SSLIOStream
# but it's here so we can clean it up in _signal_closed
# TODO: refactor that so subclasses can add additional futures
# to be cancelled.
self._ssl_connect_future = None # type: Optional[Future[SSLIOStream]]
self._connecting = False
self._state = None # type: Optional[int]
self._closed = False
def fileno(self) -> Union[int, ioloop._Selectable]:
"""Returns the file descriptor for this stream."""
raise NotImplementedError()
def close_fd(self) -> None:
"""Closes the file underlying this stream.
``close_fd`` is called by `BaseIOStream` and should not be called
elsewhere; other users should call `close` instead.
"""
raise NotImplementedError()
def write_to_fd(self, data: memoryview) -> int:
"""Attempts to write ``data`` to the underlying file.
Returns the number of bytes written.
"""
raise NotImplementedError()
def read_from_fd(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
"""Attempts to read from the underlying file.
Reads up to ``len(buf)`` bytes, storing them in the buffer.
Returns the number of bytes read. Returns None if there was
nothing to read (the socket returned `~errno.EWOULDBLOCK` or
equivalent), and zero on EOF.
.. versionchanged:: 5.0
Interface redesigned to take a buffer and return a number
of bytes instead of a freshly-allocated object.
"""
raise NotImplementedError()
def get_fd_error(self) -> Optional[Exception]:
"""Returns information about any error on the underlying file.
This method is called after the `.IOLoop` has signaled an error on the
file descriptor, and should return an Exception (such as `socket.error`
with additional information, or None if no such information is
available.
"""
return None
def read_until_regex(self, regex: bytes, max_bytes: int = None) -> Awaitable[bytes]:
"""Asynchronously read until we have matched the given regex.
The result includes the data that matches the regex and anything
that came before it.
If ``max_bytes`` is not None, the connection will be closed
if more than ``max_bytes`` bytes have been read and the regex is
not satisfied.
.. versionchanged:: 4.0
Added the ``max_bytes`` argument. The ``callback`` argument is
now optional and a `.Future` will be returned if it is omitted.
.. versionchanged:: 6.0
The ``callback`` argument was removed. Use the returned
`.Future` instead.
"""
future = self._start_read()
self._read_regex = re.compile(regex)
self._read_max_bytes = max_bytes
try:
self._try_inline_read()
except UnsatisfiableReadError as e:
# Handle this the same way as in _handle_events.
gen_log.info("Unsatisfiable read, closing connection: %s" % e)
self.close(exc_info=e)
return future
except:
# Ensure that the future doesn't log an error because its
# failure was never examined.
future.add_done_callback(lambda f: f.exception())
raise
return future
def read_until(self, delimiter: bytes, max_bytes: int = None) -> Awaitable[bytes]:
"""Asynchronously read until we have found the given delimiter.
The result includes all the data read including the delimiter.
If ``max_bytes`` is not None, the connection will be closed
if more than ``max_bytes`` bytes have been read and the delimiter
is not found.
.. versionchanged:: 4.0
Added the ``max_bytes`` argument. The ``callback`` argument is
now optional and a `.Future` will be returned if it is omitted.
.. versionchanged:: 6.0
The ``callback`` argument was removed. Use the returned
`.Future` instead.
"""
future = self._start_read()
self._read_delimiter = delimiter
self._read_max_bytes = max_bytes
try:
self._try_inline_read()
except UnsatisfiableReadError as e:
# Handle this the same way as in _handle_events.
gen_log.info("Unsatisfiable read, closing connection: %s" % e)
self.close(exc_info=e)
return future
except:
future.add_done_callback(lambda f: f.exception())
raise
return future
def read_bytes(self, num_bytes: int, partial: bool = False) -> Awaitable[bytes]:
"""Asynchronously read a number of bytes.
If ``partial`` is true, data is returned as soon as we have
any bytes to return (but never more than ``num_bytes``)
.. versionchanged:: 4.0
Added the ``partial`` argument. The callback argument is now
optional and a `.Future` will be returned if it is omitted.
.. versionchanged:: 6.0
The ``callback`` and ``streaming_callback`` arguments have
been removed. Use the returned `.Future` (and
``partial=True`` for ``streaming_callback``) instead.
"""
future = self._start_read()
assert isinstance(num_bytes, numbers.Integral)
self._read_bytes = num_bytes
self._read_partial = partial
try:
self._try_inline_read()
except:
future.add_done_callback(lambda f: f.exception())
raise
return future
def read_into(self, buf: bytearray, partial: bool = False) -> Awaitable[int]:
"""Asynchronously read a number of bytes.
``buf`` must be a writable buffer into which data will be read.
If ``partial`` is true, the callback is run as soon as any bytes
have been read. Otherwise, it is run when the ``buf`` has been
entirely filled with read data.
.. versionadded:: 5.0
.. versionchanged:: 6.0
The ``callback`` argument was removed. Use the returned
`.Future` instead.
"""
future = self._start_read()
# First copy data already in read buffer
available_bytes = self._read_buffer_size
n = len(buf)
if available_bytes >= n:
end = self._read_buffer_pos + n
buf[:] = memoryview(self._read_buffer)[self._read_buffer_pos : end]
del self._read_buffer[:end]
self._after_user_read_buffer = self._read_buffer
elif available_bytes > 0:
buf[:available_bytes] = memoryview(self._read_buffer)[
self._read_buffer_pos :
]
# Set up the supplied buffer as our temporary read buffer.
# The original (if it had any data remaining) has been
# saved for later.
self._user_read_buffer = True
self._read_buffer = buf
self._read_buffer_pos = 0
self._read_buffer_size = available_bytes
self._read_bytes = n
self._read_partial = partial
try:
self._try_inline_read()
except:
future.add_done_callback(lambda f: f.exception())
raise
return future
def read_until_close(self) -> Awaitable[bytes]:
"""Asynchronously reads all data from the socket until it is closed.
This will buffer all available data until ``max_buffer_size``
is reached. If flow control or cancellation are desired, use a
loop with `read_bytes(partial=True) <.read_bytes>` instead.
.. versionchanged:: 4.0
The callback argument is now optional and a `.Future` will
be returned if it is omitted.
.. versionchanged:: 6.0
The ``callback`` and ``streaming_callback`` arguments have
been removed. Use the returned `.Future` (and `read_bytes`
with ``partial=True`` for ``streaming_callback``) instead.
"""
future = self._start_read()
if self.closed():
self._finish_read(self._read_buffer_size, False)
return future
self._read_until_close = True
try:
self._try_inline_read()
except:
future.add_done_callback(lambda f: f.exception())
raise
return future
def write(self, data: Union[bytes, memoryview]) -> "Future[None]":
"""Asynchronously write the given data to this stream.
This method returns a `.Future` that resolves (with a result
of ``None``) when the write has been completed.
The ``data`` argument may be of type `bytes` or `memoryview`.
.. versionchanged:: 4.0
Now returns a `.Future` if no callback is given.
.. versionchanged:: 4.5
Added support for `memoryview` arguments.
.. versionchanged:: 6.0
The ``callback`` argument was removed. Use the returned
`.Future` instead.
"""
self._check_closed()
if data:
if (
self.max_write_buffer_size is not None
and len(self._write_buffer) + len(data) > self.max_write_buffer_size
):
raise StreamBufferFullError("Reached maximum write buffer size")
self._write_buffer.append(data)
self._total_write_index += len(data)
future = Future() # type: Future[None]
future.add_done_callback(lambda f: f.exception())
self._write_futures.append((self._total_write_index, future))
if not self._connecting:
self._handle_write()
if self._write_buffer:
self._add_io_state(self.io_loop.WRITE)
self._maybe_add_error_listener()
return future
def set_close_callback(self, callback: Optional[Callable[[], None]]) -> None:
"""Call the given callback when the stream is closed.
This mostly is not necessary for applications that use the
`.Future` interface; all outstanding ``Futures`` will resolve
with a `StreamClosedError` when the stream is closed. However,
it is still useful as a way to signal that the stream has been
closed while no other read or write is in progress.
Unlike other callback-based interfaces, ``set_close_callback``
was not removed in Tornado 6.0.
"""
self._close_callback = callback
self._maybe_add_error_listener()
def close(
self,
exc_info: Union[
None,
bool,
BaseException,
Tuple[
"Optional[Type[BaseException]]",
Optional[BaseException],
Optional[TracebackType],
],
] = False,
) -> None:
"""Close this stream.
If ``exc_info`` is true, set the ``error`` attribute to the current
exception from `sys.exc_info` (or if ``exc_info`` is a tuple,
use that instead of `sys.exc_info`).
"""
if not self.closed():
if exc_info:
if isinstance(exc_info, tuple):
self.error = exc_info[1]
elif isinstance(exc_info, BaseException):
self.error = exc_info
else:
exc_info = sys.exc_info()
if any(exc_info):
self.error = exc_info[1]
if self._read_until_close:
self._read_until_close = False
self._finish_read(self._read_buffer_size, False)
elif self._read_future is not None:
# resolve reads that are pending and ready to complete
try:
pos = self._find_read_pos()
except UnsatisfiableReadError:
pass
else:
if pos is not None:
self._read_from_buffer(pos)
if self._state is not None:
self.io_loop.remove_handler(self.fileno())
self._state = None
self.close_fd()
self._closed = True
self._signal_closed()
def _signal_closed(self) -> None:
futures = [] # type: List[Future]
if self._read_future is not None:
futures.append(self._read_future)
self._read_future = None
futures += [future for _, future in self._write_futures]
self._write_futures.clear()
if self._connect_future is not None:
futures.append(self._connect_future)
self._connect_future = None
for future in futures:
if not future.done():
future.set_exception(StreamClosedError(real_error=self.error))
# Reference the exception to silence warnings. Annoyingly,
# this raises if the future was cancelled, but just
# returns any other error.
try:
future.exception()
except asyncio.CancelledError:
pass
if self._ssl_connect_future is not None:
# _ssl_connect_future expects to see the real exception (typically
# an ssl.SSLError), not just StreamClosedError.
if not self._ssl_connect_future.done():
if self.error is not None:
self._ssl_connect_future.set_exception(self.error)
else:
self._ssl_connect_future.set_exception(StreamClosedError())
self._ssl_connect_future.exception()
self._ssl_connect_future = None
if self._close_callback is not None:
cb = self._close_callback
self._close_callback = None
self.io_loop.add_callback(cb)
# Clear the buffers so they can be cleared immediately even
# if the IOStream object is kept alive by a reference cycle.
# TODO: Clear the read buffer too; it currently breaks some tests.
self._write_buffer = None # type: ignore
def reading(self) -> bool:
"""Returns ``True`` if we are currently reading from the stream."""
return self._read_future is not None
def writing(self) -> bool:
"""Returns ``True`` if we are currently writing to the stream."""
return bool(self._write_buffer)
def closed(self) -> bool:
"""Returns ``True`` if the stream has been closed."""
return self._closed
def set_nodelay(self, value: bool) -> None:
"""Sets the no-delay flag for this stream.
By default, data written to TCP streams may be held for a time
to make the most efficient use of bandwidth (according to
Nagle's algorithm). The no-delay flag requests that data be
written as soon as possible, even if doing so would consume
additional bandwidth.
This flag is currently defined only for TCP-based ``IOStreams``.
.. versionadded:: 3.1
"""
pass
def _handle_connect(self) -> None:
raise NotImplementedError()
def _handle_events(self, fd: Union[int, ioloop._Selectable], events: int) -> None:
if self.closed():
gen_log.warning("Got events for closed stream %s", fd)
return
try:
if self._connecting:
# Most IOLoops will report a write failed connect
# with the WRITE event, but SelectIOLoop reports a
# READ as well so we must check for connecting before
# either.
self._handle_connect()
if self.closed():
return
if events & self.io_loop.READ:
self._handle_read()
if self.closed():
return
if events & self.io_loop.WRITE:
self._handle_write()
if self.closed():
return
if events & self.io_loop.ERROR:
self.error = self.get_fd_error()
# We may have queued up a user callback in _handle_read or
# _handle_write, so don't close the IOStream until those
# callbacks have had a chance to run.
self.io_loop.add_callback(self.close)
return
state = self.io_loop.ERROR
if self.reading():
state |= self.io_loop.READ
if self.writing():
state |= self.io_loop.WRITE
if state == self.io_loop.ERROR and self._read_buffer_size == 0:
# If the connection is idle, listen for reads too so
# we can tell if the connection is closed. If there is
# data in the read buffer we won't run the close callback
# yet anyway, so we don't need to listen in this case.
state |= self.io_loop.READ
if state != self._state:
assert (
self._state is not None
), "shouldn't happen: _handle_events without self._state"
self._state = state
self.io_loop.update_handler(self.fileno(), self._state)
except UnsatisfiableReadError as e:
gen_log.info("Unsatisfiable read, closing connection: %s" % e)
self.close(exc_info=e)
except Exception as e:
gen_log.error("Uncaught exception, closing connection.", exc_info=True)
self.close(exc_info=e)
raise
def _read_to_buffer_loop(self) -> Optional[int]:
# This method is called from _handle_read and _try_inline_read.
if self._read_bytes is not None:
target_bytes = self._read_bytes # type: Optional[int]
elif self._read_max_bytes is not None:
target_bytes = self._read_max_bytes
elif self.reading():
# For read_until without max_bytes, or
# read_until_close, read as much as we can before
# scanning for the delimiter.
target_bytes = None
else:
target_bytes = 0
next_find_pos = 0
while not self.closed():
# Read from the socket until we get EWOULDBLOCK or equivalent.
# SSL sockets do some internal buffering, and if the data is
# sitting in the SSL object's buffer select() and friends
# can't see it; the only way to find out if it's there is to
# try to read it.
if self._read_to_buffer() == 0:
break
# If we've read all the bytes we can use, break out of
# this loop.
# If we've reached target_bytes, we know we're done.
if target_bytes is not None and self._read_buffer_size >= target_bytes:
break
# Otherwise, we need to call the more expensive find_read_pos.
# It's inefficient to do this on every read, so instead
# do it on the first read and whenever the read buffer
# size has doubled.
if self._read_buffer_size >= next_find_pos:
pos = self._find_read_pos()
if pos is not None:
return pos
next_find_pos = self._read_buffer_size * 2
return self._find_read_pos()
def _handle_read(self) -> None:
try:
pos = self._read_to_buffer_loop()
except UnsatisfiableReadError:
raise
except asyncio.CancelledError:
raise
except Exception as e:
gen_log.warning("error on read: %s" % e)
self.close(exc_info=e)
return
if pos is not None:
self._read_from_buffer(pos)
def _start_read(self) -> Future:
if self._read_future is not None:
# It is an error to start a read while a prior read is unresolved.
# However, if the prior read is unresolved because the stream was
# closed without satisfying it, it's better to raise
# StreamClosedError instead of AssertionError. In particular, this
# situation occurs in harmless situations in http1connection.py and
# an AssertionError would be logged noisily.
#
# On the other hand, it is legal to start a new read while the
# stream is closed, in case the read can be satisfied from the
# read buffer. So we only want to check the closed status of the
# stream if we need to decide what kind of error to raise for
# "already reading".
#
# These conditions have proven difficult to test; we have no
# unittests that reliably verify this behavior so be careful
# when making changes here. See #2651 and #2719.
self._check_closed()
assert self._read_future is None, "Already reading"
self._read_future = Future()
return self._read_future
def _finish_read(self, size: int, streaming: bool) -> None:
if self._user_read_buffer:
self._read_buffer = self._after_user_read_buffer or bytearray()
self._after_user_read_buffer = None
self._read_buffer_pos = 0
self._read_buffer_size = len(self._read_buffer)
self._user_read_buffer = False
result = size # type: Union[int, bytes]
else:
result = self._consume(size)
if self._read_future is not None:
future = self._read_future
self._read_future = None
future_set_result_unless_cancelled(future, result)
self._maybe_add_error_listener()
def _try_inline_read(self) -> None:
"""Attempt to complete the current read operation from buffered data.
If the read can be completed without blocking, schedules the
read callback on the next IOLoop iteration; otherwise starts
listening for reads on the socket.
"""
# See if we've already got the data from a previous read
pos = self._find_read_pos()
if pos is not None:
self._read_from_buffer(pos)
return
self._check_closed()
pos = self._read_to_buffer_loop()
if pos is not None:
self._read_from_buffer(pos)
return
# We couldn't satisfy the read inline, so make sure we're
# listening for new data unless the stream is closed.
if not self.closed():
self._add_io_state(ioloop.IOLoop.READ)
def _read_to_buffer(self) -> Optional[int]:
"""Reads from the socket and appends the result to the read buffer.
Returns the number of bytes read. Returns 0 if there is nothing
to read (i.e. the read returns EWOULDBLOCK or equivalent). On
error closes the socket and raises an exception.
"""
try:
while True:
try:
if self._user_read_buffer:
buf = memoryview(self._read_buffer)[
self._read_buffer_size :
] # type: Union[memoryview, bytearray]
else:
buf = bytearray(self.read_chunk_size)
bytes_read = self.read_from_fd(buf)
except (socket.error, IOError, OSError) as e:
if errno_from_exception(e) == errno.EINTR:
continue
# ssl.SSLError is a subclass of socket.error
if self._is_connreset(e):
# Treat ECONNRESET as a connection close rather than
# an error to minimize log spam (the exception will
# be available on self.error for apps that care).
self.close(exc_info=e)
return None
self.close(exc_info=e)
raise
break
if bytes_read is None:
return 0
elif bytes_read == 0:
self.close()
return 0
if not self._user_read_buffer:
self._read_buffer += memoryview(buf)[:bytes_read]
self._read_buffer_size += bytes_read
finally:
# Break the reference to buf so we don't waste a chunk's worth of
# memory in case an exception hangs on to our stack frame.
del buf
if self._read_buffer_size > self.max_buffer_size:
gen_log.error("Reached maximum read buffer size")
self.close()
raise StreamBufferFullError("Reached maximum read buffer size")
return bytes_read
def _read_from_buffer(self, pos: int) -> None:
"""Attempts to complete the currently-pending read from the buffer.
The argument is either a position in the read buffer or None,
as returned by _find_read_pos.
"""
self._read_bytes = self._read_delimiter = self._read_regex = None
self._read_partial = False
self._finish_read(pos, False)
def _find_read_pos(self) -> Optional[int]:
"""Attempts to find a position in the read buffer that satisfies
the currently-pending read.
Returns a position in the buffer if the current read can be satisfied,
or None if it cannot.
"""
if self._read_bytes is not None and (
self._read_buffer_size >= self._read_bytes
or (self._read_partial and self._read_buffer_size > 0)
):
num_bytes = min(self._read_bytes, self._read_buffer_size)
return num_bytes
elif self._read_delimiter is not None:
# Multi-byte delimiters (e.g. '\r\n') may straddle two
# chunks in the read buffer, so we can't easily find them
# without collapsing the buffer. However, since protocols
# using delimited reads (as opposed to reads of a known
# length) tend to be "line" oriented, the delimiter is likely
# to be in the first few chunks. Merge the buffer gradually
# since large merges are relatively expensive and get undone in
# _consume().
if self._read_buffer:
loc = self._read_buffer.find(
self._read_delimiter, self._read_buffer_pos
)
if loc != -1:
loc -= self._read_buffer_pos
delimiter_len = len(self._read_delimiter)
self._check_max_bytes(self._read_delimiter, loc + delimiter_len)
return loc + delimiter_len
self._check_max_bytes(self._read_delimiter, self._read_buffer_size)
elif self._read_regex is not None:
if self._read_buffer:
m = self._read_regex.search(self._read_buffer, self._read_buffer_pos)
if m is not None:
loc = m.end() - self._read_buffer_pos
self._check_max_bytes(self._read_regex, loc)
return loc
self._check_max_bytes(self._read_regex, self._read_buffer_size)
return None
def _check_max_bytes(self, delimiter: Union[bytes, Pattern], size: int) -> None:
if self._read_max_bytes is not None and size > self._read_max_bytes:
raise UnsatisfiableReadError(
"delimiter %r not found within %d bytes"
% (delimiter, self._read_max_bytes)
)
def _handle_write(self) -> None:
while True:
size = len(self._write_buffer)
if not size:
break
assert size > 0
try:
if _WINDOWS:
# On windows, socket.send blows up if given a
# write buffer that's too large, instead of just
# returning the number of bytes it was able to
# process. Therefore we must not call socket.send
# with more than 128KB at a time.
size = 128 * 1024
num_bytes = self.write_to_fd(self._write_buffer.peek(size))
if num_bytes == 0:
break
self._write_buffer.advance(num_bytes)
self._total_write_done_index += num_bytes
except (socket.error, IOError, OSError) as e:
if e.args[0] in _ERRNO_WOULDBLOCK:
break
else:
if not self._is_connreset(e):
# Broken pipe errors are usually caused by connection
# reset, and its better to not log EPIPE errors to
# minimize log spam
gen_log.warning("Write error on %s: %s", self.fileno(), e)
self.close(exc_info=e)
return
while self._write_futures:
index, future = self._write_futures[0]
if index > self._total_write_done_index:
break
self._write_futures.popleft()
future_set_result_unless_cancelled(future, None)
def _consume(self, loc: int) -> bytes:
# Consume loc bytes from the read buffer and return them
if loc == 0:
return b""
assert loc <= self._read_buffer_size
# Slice the bytearray buffer into bytes, without intermediate copying
b = (
memoryview(self._read_buffer)[
self._read_buffer_pos : self._read_buffer_pos + loc
]
).tobytes()
self._read_buffer_pos += loc
self._read_buffer_size -= loc
# Amortized O(1) shrink
# (this heuristic is implemented natively in Python 3.4+
# but is replicated here for Python 2)
if self._read_buffer_pos > self._read_buffer_size:
del self._read_buffer[: self._read_buffer_pos]
self._read_buffer_pos = 0
return b
def _check_closed(self) -> None:
if self.closed():
raise StreamClosedError(real_error=self.error)
def _maybe_add_error_listener(self) -> None:
# This method is part of an optimization: to detect a connection that
# is closed when we're not actively reading or writing, we must listen
# for read events. However, it is inefficient to do this when the
# connection is first established because we are going to read or write
# immediately anyway. Instead, we insert checks at various times to
# see if the connection is idle and add the read listener then.
if self._state is None or self._state == ioloop.IOLoop.ERROR:
if (
not self.closed()
and self._read_buffer_size == 0
and self._close_callback is not None
):
self._add_io_state(ioloop.IOLoop.READ)
def _add_io_state(self, state: int) -> None:
"""Adds `state` (IOLoop.{READ,WRITE} flags) to our event handler.
Implementation notes: Reads and writes have a fast path and a
slow path. The fast path reads synchronously from socket
buffers, while the slow path uses `_add_io_state` to schedule
an IOLoop callback.
To detect closed connections, we must have called
`_add_io_state` at some point, but we want to delay this as
much as possible so we don't have to set an `IOLoop.ERROR`
listener that will be overwritten by the next slow-path
operation. If a sequence of fast-path ops do not end in a
slow-path op, (e.g. for an @asynchronous long-poll request),
we must add the error handler.
TODO: reevaluate this now that callbacks are gone.
"""
if self.closed():
# connection has been closed, so there can be no future events
return
if self._state is None:
self._state = ioloop.IOLoop.ERROR | state
self.io_loop.add_handler(self.fileno(), self._handle_events, self._state)
elif not self._state & state:
self._state = self._state | state
self.io_loop.update_handler(self.fileno(), self._state)
def _is_connreset(self, exc: BaseException) -> bool:
"""Return ``True`` if exc is ECONNRESET or equivalent.
May be overridden in subclasses.
"""
return (
isinstance(exc, (socket.error, IOError))
and errno_from_exception(exc) in _ERRNO_CONNRESET
)
class IOStream(BaseIOStream):
r"""Socket-based `IOStream` implementation.
This class supports the read and write methods from `BaseIOStream`
plus a `connect` method.
The ``socket`` parameter may either be connected or unconnected.
For server operations the socket is the result of calling
`socket.accept <socket.socket.accept>`. For client operations the
socket is created with `socket.socket`, and may either be
connected before passing it to the `IOStream` or connected with
`IOStream.connect`.
A very simple (and broken) HTTP client using this class:
.. testcode::
import tornado.ioloop
import tornado.iostream
import socket
async def main():
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM, 0)
stream = tornado.iostream.IOStream(s)
await stream.connect(("friendfeed.com", 80))
await stream.write(b"GET / HTTP/1.0\r\nHost: friendfeed.com\r\n\r\n")
header_data = await stream.read_until(b"\r\n\r\n")
headers = {}
for line in header_data.split(b"\r\n"):
parts = line.split(b":")
if len(parts) == 2:
headers[parts[0].strip()] = parts[1].strip()
body_data = await stream.read_bytes(int(headers[b"Content-Length"]))
print(body_data)
stream.close()
if __name__ == '__main__':
tornado.ioloop.IOLoop.current().run_sync(main)
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM, 0)
stream = tornado.iostream.IOStream(s)
stream.connect(("friendfeed.com", 80), send_request)
tornado.ioloop.IOLoop.current().start()
.. testoutput::
:hide:
"""
def __init__(self, socket: socket.socket, *args: Any, **kwargs: Any) -> None:
self.socket = socket
self.socket.setblocking(False)
super(IOStream, self).__init__(*args, **kwargs)
def fileno(self) -> Union[int, ioloop._Selectable]:
return self.socket
def close_fd(self) -> None:
self.socket.close()
self.socket = None # type: ignore
def get_fd_error(self) -> Optional[Exception]:
errno = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
return socket.error(errno, os.strerror(errno))
def read_from_fd(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
try:
return self.socket.recv_into(buf, len(buf))
except socket.error as e:
if e.args[0] in _ERRNO_WOULDBLOCK:
return None
else:
raise
finally:
del buf
def write_to_fd(self, data: memoryview) -> int:
try:
return self.socket.send(data) # type: ignore
finally:
# Avoid keeping to data, which can be a memoryview.
# See https://github.com/tornadoweb/tornado/pull/2008
del data
def connect(
self: _IOStreamType, address: tuple, server_hostname: str = None
) -> "Future[_IOStreamType]":
"""Connects the socket to a remote address without blocking.
May only be called if the socket passed to the constructor was
not previously connected. The address parameter is in the
same format as for `socket.connect <socket.socket.connect>` for
the type of socket passed to the IOStream constructor,
e.g. an ``(ip, port)`` tuple. Hostnames are accepted here,
but will be resolved synchronously and block the IOLoop.
If you have a hostname instead of an IP address, the `.TCPClient`
class is recommended instead of calling this method directly.
`.TCPClient` will do asynchronous DNS resolution and handle
both IPv4 and IPv6.
If ``callback`` is specified, it will be called with no
arguments when the connection is completed; if not this method
returns a `.Future` (whose result after a successful
connection will be the stream itself).
In SSL mode, the ``server_hostname`` parameter will be used
for certificate validation (unless disabled in the
``ssl_options``) and SNI (if supported; requires Python
2.7.9+).
Note that it is safe to call `IOStream.write
<BaseIOStream.write>` while the connection is pending, in
which case the data will be written as soon as the connection
is ready. Calling `IOStream` read methods before the socket is
connected works on some platforms but is non-portable.
.. versionchanged:: 4.0
If no callback is given, returns a `.Future`.
.. versionchanged:: 4.2
SSL certificates are validated by default; pass
``ssl_options=dict(cert_reqs=ssl.CERT_NONE)`` or a
suitably-configured `ssl.SSLContext` to the
`SSLIOStream` constructor to disable.
.. versionchanged:: 6.0
The ``callback`` argument was removed. Use the returned
`.Future` instead.
"""
self._connecting = True
future = Future() # type: Future[_IOStreamType]
self._connect_future = typing.cast("Future[IOStream]", future)
try:
self.socket.connect(address)
except socket.error as e:
# In non-blocking mode we expect connect() to raise an
# exception with EINPROGRESS or EWOULDBLOCK.
#
# On freebsd, other errors such as ECONNREFUSED may be
# returned immediately when attempting to connect to
# localhost, so handle them the same way as an error
# reported later in _handle_connect.
if (
errno_from_exception(e) not in _ERRNO_INPROGRESS
and errno_from_exception(e) not in _ERRNO_WOULDBLOCK
):
if future is None:
gen_log.warning(
"Connect error on fd %s: %s", self.socket.fileno(), e
)
self.close(exc_info=e)
return future
self._add_io_state(self.io_loop.WRITE)
return future
def start_tls(
self,
server_side: bool,
ssl_options: Union[Dict[str, Any], ssl.SSLContext] = None,
server_hostname: str = None,
) -> Awaitable["SSLIOStream"]:
"""Convert this `IOStream` to an `SSLIOStream`.
This enables protocols that begin in clear-text mode and
switch to SSL after some initial negotiation (such as the
``STARTTLS`` extension to SMTP and IMAP).
This method cannot be used if there are outstanding reads
or writes on the stream, or if there is any data in the
IOStream's buffer (data in the operating system's socket
buffer is allowed). This means it must generally be used
immediately after reading or writing the last clear-text
data. It can also be used immediately after connecting,
before any reads or writes.
The ``ssl_options`` argument may be either an `ssl.SSLContext`
object or a dictionary of keyword arguments for the
`ssl.wrap_socket` function. The ``server_hostname`` argument
will be used for certificate validation unless disabled
in the ``ssl_options``.
This method returns a `.Future` whose result is the new
`SSLIOStream`. After this method has been called,
any other operation on the original stream is undefined.
If a close callback is defined on this stream, it will be
transferred to the new stream.
.. versionadded:: 4.0
.. versionchanged:: 4.2
SSL certificates are validated by default; pass
``ssl_options=dict(cert_reqs=ssl.CERT_NONE)`` or a
suitably-configured `ssl.SSLContext` to disable.
"""
if (
self._read_future
or self._write_futures
or self._connect_future
or self._closed
or self._read_buffer
or self._write_buffer
):
raise ValueError("IOStream is not idle; cannot convert to SSL")
if ssl_options is None:
if server_side:
ssl_options = _server_ssl_defaults
else:
ssl_options = _client_ssl_defaults
socket = self.socket
self.io_loop.remove_handler(socket)
self.socket = None # type: ignore
socket = ssl_wrap_socket(
socket,
ssl_options,
server_hostname=server_hostname,
server_side=server_side,
do_handshake_on_connect=False,
)
orig_close_callback = self._close_callback
self._close_callback = None
future = Future() # type: Future[SSLIOStream]
ssl_stream = SSLIOStream(socket, ssl_options=ssl_options)
ssl_stream.set_close_callback(orig_close_callback)
ssl_stream._ssl_connect_future = future
ssl_stream.max_buffer_size = self.max_buffer_size
ssl_stream.read_chunk_size = self.read_chunk_size
return future
def _handle_connect(self) -> None:
try:
err = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
except socket.error as e:
# Hurd doesn't allow SO_ERROR for loopback sockets because all
# errors for such sockets are reported synchronously.
if errno_from_exception(e) == errno.ENOPROTOOPT:
err = 0
if err != 0:
self.error = socket.error(err, os.strerror(err))
# IOLoop implementations may vary: some of them return
# an error state before the socket becomes writable, so
# in that case a connection failure would be handled by the
# error path in _handle_events instead of here.
if self._connect_future is None:
gen_log.warning(
"Connect error on fd %s: %s",
self.socket.fileno(),
errno.errorcode[err],
)
self.close()
return
if self._connect_future is not None:
future = self._connect_future
self._connect_future = None
future_set_result_unless_cancelled(future, self)
self._connecting = False
def set_nodelay(self, value: bool) -> None:
if self.socket is not None and self.socket.family in (
socket.AF_INET,
socket.AF_INET6,
):
try:
self.socket.setsockopt(
socket.IPPROTO_TCP, socket.TCP_NODELAY, 1 if value else 0
)
except socket.error as e:
# Sometimes setsockopt will fail if the socket is closed
# at the wrong time. This can happen with HTTPServer
# resetting the value to ``False`` between requests.
if e.errno != errno.EINVAL and not self._is_connreset(e):
raise
class SSLIOStream(IOStream):
"""A utility class to write to and read from a non-blocking SSL socket.
If the socket passed to the constructor is already connected,
it should be wrapped with::
ssl.wrap_socket(sock, do_handshake_on_connect=False, **kwargs)
before constructing the `SSLIOStream`. Unconnected sockets will be
wrapped when `IOStream.connect` is finished.
"""
socket = None # type: ssl.SSLSocket
def __init__(self, *args: Any, **kwargs: Any) -> None:
"""The ``ssl_options`` keyword argument may either be an
`ssl.SSLContext` object or a dictionary of keywords arguments
for `ssl.wrap_socket`
"""
self._ssl_options = kwargs.pop("ssl_options", _client_ssl_defaults)
super(SSLIOStream, self).__init__(*args, **kwargs)
self._ssl_accepting = True
self._handshake_reading = False
self._handshake_writing = False
self._server_hostname = None # type: Optional[str]
# If the socket is already connected, attempt to start the handshake.
try:
self.socket.getpeername()
except socket.error:
pass
else:
# Indirectly start the handshake, which will run on the next
# IOLoop iteration and then the real IO state will be set in
# _handle_events.
self._add_io_state(self.io_loop.WRITE)
def reading(self) -> bool:
return self._handshake_reading or super(SSLIOStream, self).reading()
def writing(self) -> bool:
return self._handshake_writing or super(SSLIOStream, self).writing()
def _do_ssl_handshake(self) -> None:
# Based on code from test_ssl.py in the python stdlib
try:
self._handshake_reading = False
self._handshake_writing = False
self.socket.do_handshake()
except ssl.SSLError as err:
if err.args[0] == ssl.SSL_ERROR_WANT_READ:
self._handshake_reading = True
return
elif err.args[0] == ssl.SSL_ERROR_WANT_WRITE:
self._handshake_writing = True
return
elif err.args[0] in (ssl.SSL_ERROR_EOF, ssl.SSL_ERROR_ZERO_RETURN):
return self.close(exc_info=err)
elif err.args[0] == ssl.SSL_ERROR_SSL:
try:
peer = self.socket.getpeername()
except Exception:
peer = "(not connected)"
gen_log.warning(
"SSL Error on %s %s: %s", self.socket.fileno(), peer, err
)
return self.close(exc_info=err)
raise
except socket.error as err:
# Some port scans (e.g. nmap in -sT mode) have been known
# to cause do_handshake to raise EBADF and ENOTCONN, so make
# those errors quiet as well.
# https://groups.google.com/forum/?fromgroups#!topic/python-tornado/ApucKJat1_0
# Errno 0 is also possible in some cases (nc -z).
# https://github.com/tornadoweb/tornado/issues/2504
if self._is_connreset(err) or err.args[0] in (
0,
errno.EBADF,
errno.ENOTCONN,
):
return self.close(exc_info=err)
raise
except AttributeError as err:
# On Linux, if the connection was reset before the call to
# wrap_socket, do_handshake will fail with an
# AttributeError.
return self.close(exc_info=err)
else:
self._ssl_accepting = False
if not self._verify_cert(self.socket.getpeercert()):
self.close()
return
self._finish_ssl_connect()
def _finish_ssl_connect(self) -> None:
if self._ssl_connect_future is not None:
future = self._ssl_connect_future
self._ssl_connect_future = None
future_set_result_unless_cancelled(future, self)
def _verify_cert(self, peercert: Any) -> bool:
"""Returns ``True`` if peercert is valid according to the configured
validation mode and hostname.
The ssl handshake already tested the certificate for a valid
CA signature; the only thing that remains is to check
the hostname.
"""
if isinstance(self._ssl_options, dict):
verify_mode = self._ssl_options.get("cert_reqs", ssl.CERT_NONE)
elif isinstance(self._ssl_options, ssl.SSLContext):
verify_mode = self._ssl_options.verify_mode
assert verify_mode in (ssl.CERT_NONE, ssl.CERT_REQUIRED, ssl.CERT_OPTIONAL)
if verify_mode == ssl.CERT_NONE or self._server_hostname is None:
return True
cert = self.socket.getpeercert()
if cert is None and verify_mode == ssl.CERT_REQUIRED:
gen_log.warning("No SSL certificate given")
return False
try:
ssl.match_hostname(peercert, self._server_hostname)
except ssl.CertificateError as e:
gen_log.warning("Invalid SSL certificate: %s" % e)
return False
else:
return True
def _handle_read(self) -> None:
if self._ssl_accepting:
self._do_ssl_handshake()
return
super(SSLIOStream, self)._handle_read()
def _handle_write(self) -> None:
if self._ssl_accepting:
self._do_ssl_handshake()
return
super(SSLIOStream, self)._handle_write()
def connect(
self, address: Tuple, server_hostname: str = None
) -> "Future[SSLIOStream]":
self._server_hostname = server_hostname
# Ignore the result of connect(). If it fails,
# wait_for_handshake will raise an error too. This is
# necessary for the old semantics of the connect callback
# (which takes no arguments). In 6.0 this can be refactored to
# be a regular coroutine.
# TODO: This is trickier than it looks, since if write()
# is called with a connect() pending, we want the connect
# to resolve before the write. Or do we care about this?
# (There's a test for it, but I think in practice users
# either wait for the connect before performing a write or
# they don't care about the connect Future at all)
fut = super(SSLIOStream, self).connect(address)
fut.add_done_callback(lambda f: f.exception())
return self.wait_for_handshake()
def _handle_connect(self) -> None:
# Call the superclass method to check for errors.
super(SSLIOStream, self)._handle_connect()
if self.closed():
return
# When the connection is complete, wrap the socket for SSL
# traffic. Note that we do this by overriding _handle_connect
# instead of by passing a callback to super().connect because
# user callbacks are enqueued asynchronously on the IOLoop,
# but since _handle_events calls _handle_connect immediately
# followed by _handle_write we need this to be synchronous.
#
# The IOLoop will get confused if we swap out self.socket while the
# fd is registered, so remove it now and re-register after
# wrap_socket().
self.io_loop.remove_handler(self.socket)
old_state = self._state
assert old_state is not None
self._state = None
self.socket = ssl_wrap_socket(
self.socket,
self._ssl_options,
server_hostname=self._server_hostname,
do_handshake_on_connect=False,
)
self._add_io_state(old_state)
def wait_for_handshake(self) -> "Future[SSLIOStream]":
"""Wait for the initial SSL handshake to complete.
If a ``callback`` is given, it will be called with no
arguments once the handshake is complete; otherwise this
method returns a `.Future` which will resolve to the
stream itself after the handshake is complete.
Once the handshake is complete, information such as
the peer's certificate and NPN/ALPN selections may be
accessed on ``self.socket``.
This method is intended for use on server-side streams
or after using `IOStream.start_tls`; it should not be used
with `IOStream.connect` (which already waits for the
handshake to complete). It may only be called once per stream.
.. versionadded:: 4.2
.. versionchanged:: 6.0
The ``callback`` argument was removed. Use the returned
`.Future` instead.
"""
if self._ssl_connect_future is not None:
raise RuntimeError("Already waiting")
future = self._ssl_connect_future = Future()
if not self._ssl_accepting:
self._finish_ssl_connect()
return future
def write_to_fd(self, data: memoryview) -> int:
try:
return self.socket.send(data) # type: ignore
except ssl.SSLError as e:
if e.args[0] == ssl.SSL_ERROR_WANT_WRITE:
# In Python 3.5+, SSLSocket.send raises a WANT_WRITE error if
# the socket is not writeable; we need to transform this into
# an EWOULDBLOCK socket.error or a zero return value,
# either of which will be recognized by the caller of this
# method. Prior to Python 3.5, an unwriteable socket would
# simply return 0 bytes written.
return 0
raise
finally:
# Avoid keeping to data, which can be a memoryview.
# See https://github.com/tornadoweb/tornado/pull/2008
del data
def read_from_fd(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
try:
if self._ssl_accepting:
# If the handshake hasn't finished yet, there can't be anything
# to read (attempting to read may or may not raise an exception
# depending on the SSL version)
return None
try:
return self.socket.recv_into(buf, len(buf))
except ssl.SSLError as e:
# SSLError is a subclass of socket.error, so this except
# block must come first.
if e.args[0] == ssl.SSL_ERROR_WANT_READ:
return None
else:
raise
except socket.error as e:
if e.args[0] in _ERRNO_WOULDBLOCK:
return None
else:
raise
finally:
del buf
def _is_connreset(self, e: BaseException) -> bool:
if isinstance(e, ssl.SSLError) and e.args[0] == ssl.SSL_ERROR_EOF:
return True
return super(SSLIOStream, self)._is_connreset(e)
class PipeIOStream(BaseIOStream):
"""Pipe-based `IOStream` implementation.
The constructor takes an integer file descriptor (such as one returned
by `os.pipe`) rather than an open file object. Pipes are generally
one-way, so a `PipeIOStream` can be used for reading or writing but not
both.
"""
def __init__(self, fd: int, *args: Any, **kwargs: Any) -> None:
self.fd = fd
self._fio = io.FileIO(self.fd, "r+")
_set_nonblocking(fd)
super(PipeIOStream, self).__init__(*args, **kwargs)
def fileno(self) -> int:
return self.fd
def close_fd(self) -> None:
self._fio.close()
def write_to_fd(self, data: memoryview) -> int:
try:
return os.write(self.fd, data) # type: ignore
finally:
# Avoid keeping to data, which can be a memoryview.
# See https://github.com/tornadoweb/tornado/pull/2008
del data
def read_from_fd(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
try:
return self._fio.readinto(buf) # type: ignore
except (IOError, OSError) as e:
if errno_from_exception(e) == errno.EBADF:
# If the writing half of a pipe is closed, select will
# report it as readable but reads will fail with EBADF.
self.close(exc_info=e)
return None
else:
raise
finally:
del buf
def doctests() -> Any:
import doctest
return doctest.DocTestSuite()
Zerion Mini Shell 1.0