Mini Shell
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<!-- This XSL Stylesheet is used to handle Storage Services Message IDs -->
<xsl:include href="../../sm/template/common/smmsgs.xsl"/>
<xsl:include href="../../sm/template/en/common/smmsgs.xsl"/>
<xsl:include href="commsg.xsl"/>
<xsl:output method="text" indent="no"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/OMA">
<!-- CLISubCommand prints out the sub command along with the appropriate number of spaces -->
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">
<xsl:value-of select="CLISubCommand"/>
</xsl:with-param>
</xsl:call-template>
<!-- CLIMsgID -->
<xsl:choose>
<!--First make sure syntax check was successful before displaying the status from DA-->
<!--next check to see if CLIMsgID = 1011 and value for CustomStat is set to non-zero. This is a case where SMStatus is non-zero and "clpsup" updates CLIMsgId=1011 to reflect the non-zero SMStatus from DA-->
<!-- Ideally if syntax check fails,command should not be sent to DA and should never have the CustomStat tag-->
<xsl:when test="CLIMsgID='1000' and CustomStat">
<xsl:call-template name="GetMessage">
<xsl:with-param name="ErrorID">
<xsl:value-of select="CustomStat"/>
</xsl:with-param>
</xsl:call-template>
</xsl:when>
<xsl:when test="CLIMsgID='1011' and CustomStat">
<xsl:call-template name="GetMessage">
<xsl:with-param name="ErrorID">
<xsl:value-of select="CustomStat"/>
</xsl:with-param>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="CLIMsgID">
<xsl:with-param name="id">
<xsl:value-of select="CLIMsgID"/>
</xsl:with-param>
<xsl:with-param name="shownvpairs">
<xsl:value-of select="CLIShowNVPairs"/>
</xsl:with-param>
<xsl:with-param name="nametxt">
<xsl:value-of select="CLIParseName"/>
</xsl:with-param>
<xsl:with-param name="paramtxt">
<xsl:value-of select="CLIParamName"/>
</xsl:with-param>
<xsl:with-param name="parsetxt">
<xsl:value-of select="CLIParseTxt"/>
</xsl:with-param>
<xsl:with-param name="parsetxt2">
<xsl:value-of select="CLIParseTxt2"/>
</xsl:with-param>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="CLIMsgID">
<xsl:param name="id"/>
<xsl:param name="shownvpairs"/>
<xsl:param name="nametxt"/>
<xsl:param name="paramtxt"/>
<xsl:param name="parsetxt"/>
<xsl:param name="parsetxt2"/>
<xsl:choose>
<xsl:when test="$id='6000'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">storage</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Display storage component properties.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id='6001'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">storage</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Set storage component properties.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id='6002'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">storage</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->For further help, type the command followed by -?<!--XLATESTOP-->
</xsl:when>
<!-- omreport storage controller usage -->
<xsl:when test="$id = '6011'">
<!--XLATESTART-->Display controller(s) properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->Display the properties of the specified controller.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->For a given controller, component info can be obtained by specifying the following parameters<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=foreignkeyids </xsl:text>
<!--XLATESTART-->Enables the locked foreign configuration to be available for import or clear operations.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=pdslotreport </xsl:text>
<!--XLATESTART-->Displays empty and occupied slot details of all the enclosures in the controller.<!--XLATESTART-->
</xsl:if>
</xsl:when>
<!-- omreport storage adisk usage -->
<xsl:when test="$id = '6021'">
<!--XLATESTART-->Display array disk(s) properties. DEPRECATED: please use pdisk<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Required parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All array disks are displayed<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>vdisk=id </xsl:text>
<!--XLATESTART-->All array disks that comprise the indicated<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<!--XLATESTART--> virtual disk<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>cachecade=id </xsl:text>
<!--XLATESTART-->All array disks that comprise the indicated<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<!--XLATESTART--> cachecade(s)<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>connector=id </xsl:text>
<!--XLATESTART-->All array disks on the indicated connector<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>adisk=<ADISKID> </xsl:text>
<!--XLATESTART-->The indicated array disk<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text> where ADISKID=<connector:enclosureID:portID | connector:targetID></xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage pdisk usage -->
<xsl:when test="$id = '6022'">
<!--XLATESTART-->Display physical disk(s) properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Required parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All physical disks are displayed<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>vdisk=id </xsl:text>
<!--XLATESTART-->All physical disks that comprise the indicated<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<!--XLATESTART--> virtual disk<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>cachecade=id </xsl:text>
<!--XLATESTART-->All physical disks that comprise the indicated<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<!--XLATESTART--> cachecade(s)<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>connector=id </xsl:text>
<!--XLATESTART-->All physical disks on the indicated connector<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>pdisk=<PDISKID> </xsl:text>
<!--XLATESTART-->The indicated physical disk<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text> where PDISKID=<connector:enclosureID:portID | connector:targetID></xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage vdisk usage -->
<xsl:when test="$id = '6031'">
<!--XLATESTART-->Display virtual disk(s) properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All virtual disks on the indicated controller<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id vdisk=id </xsl:text>
<!--XLATESTART-->The indicated virtual disk<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage tape usage -->
<xsl:when test="$id = '6032'">
<!--XLATESTART-->Display Tape Drive(s) properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Required parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All Tape Drives are displayed<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>connector=id </xsl:text>
<!--XLATESTART-->All Tape Drives on the indicated connector<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>tape=<tapeid> </xsl:text>
<!--XLATESTART-->The indicated Tape Drive<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text> where tapeid=<connector:targetID></xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage connectors usage -->
<xsl:when test="$id = '6042'">
<!--XLATESTART-->Display connector properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Required parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All connectors are displayed<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>connector=id </xsl:text>
<!--XLATESTART-->The indicated connector on the given controller<!--XLATESTOP-->
</xsl:if>
</xsl:when>
<!-- omreport storage enclosure usage -->
<xsl:when test="$id='6051'">
<!--XLATESTART-->Display enclosure properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All enclosures connected to the controller.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id enclosure=<ENCLOSUREID> </xsl:text>
<!--XLATESTART-->Information about indicated enclosure<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text> where ENCLOSUREID=<connector | connector:enclosureID></xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->For a given enclosure, component info can be obtained by specifying the following parameters<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=temps </xsl:text>
<!--XLATESTART-->Information about all temperature probe.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=temps index=n </xsl:text>
<!--XLATESTART-->Information about a specific temperature probe.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=fans </xsl:text>
<!--XLATESTART-->Information about all fans.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=fans index=n </xsl:text>
<!--XLATESTART-->Information about a specific fan.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=pwrsupplies </xsl:text>
<!--XLATESTART-->Information about all power supplies.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=pwrsupplies index=n </xsl:text>
<!--XLATESTART-->Information about a specific power supply.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=emms </xsl:text>
<!--XLATESTART-->Information about all EMMs.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=emms index=n </xsl:text>
<!--XLATESTART-->Information about a specific EMM.<!--XLATESTART-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=pdslotreport </xsl:text>
<!--XLATESTART-->Information about empty and occupied slot details.<!--XLATESTART-->
</xsl:if>
</xsl:when>
<!-- omreport storage battery usage -->
<xsl:when test="$id = '6061'">
<!--XLATESTART-->Display battery properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART-->All batteries on the indicated controller<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id battery=id </xsl:text>
<!--XLATESTART-->The indicated battery<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage globalinfo usage -->
<xsl:when test="$id = '6062'">
<!--XLATESTART-->Display global storage properties.<!--XLATESTOP-->
</xsl:when>
<!-- omreport storage pciessd usage -->
<xsl:when test="$id = '6071'">
<!--XLATESTART-->Display PCIeSSD subsystem properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>subsystem=id </xsl:text>
<!--XLATESTART-->Display the properties of the specified PCIe Subsystem.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>info=pdslotreport </xsl:text>
<!--XLATESTART-->Displays empty and occupied slot details of the backplane attached to the subsystem.<!--XLATESTART-->
</xsl:if>
</xsl:when>
<!-- omreport storage fluid cache usage -->
<xsl:when test="$id = '6081'">
<!--XLATESTART-->Display Fluid Cache properties and the associated fluid cachedisks.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage fluidcachedisk usage -->
<xsl:when test="$id = '6085'">
<!--XLATESTART-->Display Fluidcache disks properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage cachepool usage -->
<xsl:when test="$id = '6091'">
<!--XLATESTART-->Display Fluid CachePool properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage nvmeadapter usage -->
<xsl:when test="$id = '6043'">
<!--XLATESTART-->Display nvmeadapter properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<!-- omreport storage partition usage -->
<xsl:when test="$id = '6095'">
<!--XLATESTART-->Display Partition details for the specified controller and vdisk.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Required parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>vdisk=id </xsl:text>
</xsl:if>
</xsl:when>
<!-- HAVEN'T LOOKED AT THE BELOW CODE YET! -->
<xsl:when test="$id = '6941'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">battery</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports battery configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6942'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">battery</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports battery configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=recondition
Required parameters are:
controller=id
battery=id
reconditions given battery</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=startlearn
Required parameters are:
controller=id
battery=id
starts a learn cycle on the given battery</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=delaylearn
Required parameters are:
controller=id
battery=id
days=d
hours=h
delays a learn cycle on the given battery for the specified amount of time</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<xsl:when test="$id = '6951'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">enclosure</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports enclosure configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id='6952'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">enclosure</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports enclosure configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enablealarm
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
where ENCLOSUREID=<connector | connector:enclosureID>
enables enclosure alarm</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=disablealarm
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
where ENCLOSUREID=<connector | connector:enclosureID>
disables enclosure alarm</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setassettag
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
assettag=<string>
where ENCLOSUREID=<connector | connector:enclosureID>
sets enclosure asset tag</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setassetname
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
assetname=<string>
where ENCLOSUREID=<connector | connector:enclosureID>
sets enclosure asset name</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setalltempprobes
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
minwarn=n
maxwarn=n
where ENCLOSUREID=<connector | connector:enclosureID>
sets minimum warning and maximum warning threshold for all temperature probes</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=resetalltempprobes
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
where ENCLOSUREID=<connector | connector:enclosureID>
sets to default minimum warning and maximum warning threshold for all temperature probes</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=blink
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
where ENCLOSUREID=<connector | connector:enclosureID>
blinks the enclosure LEDs</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unblink
Required parameters are:
controller=id
enclosure=<ENCLOSUREID>
where ENCLOSUREID=<connector | connector:enclosureID>
unblinks the enclosure LEDs</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- omconfig storage connector-->
<xsl:when test="$id = '6963'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">connector</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports connector configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6964'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">connector</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports connector configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rescan
Required parameters are:
controller=id
connector=id
performs rescan on the given connector</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- omconfig storage nvmeadapter-->
<xsl:when test="$id = '6044'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">nvmeadapter</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports nvmeadapter configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6045'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">nvmeadapter</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports nvmeadapter configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=exportlog
Required parameters are:
controller=id
nvmeid=PCI Slot
Optional parameters are:
Filename=<filename>
exports the NVMe Adapter log to windows folder on Windows and /var/log on Linux. The default log filename is NVME_<serial no>_<timestamp>.log where <serial no> is the serial number of the NVMe adapter and timestamp is month, day, hour, minute and second when the command is run.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cryptographicerase
Required parameters are:
controller=id
nvmeid=PCI Slot
erases the given NVMe device. This option is available only for NVMe devices.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=exporttelemetrylog
Required parameters are:
controller=id
nvmeid=PCI Slot
Optional parameters are:
Filename=<filename>
exports the PCIe SSD or NVMe device telemetry log to windows folder on Windows and /var/log on Linux. The default telemetry log file name will be NVME_TELEMETRY_<serial no>_<timestamp>_Host.bin and the user-defined file name displays as NVME_TELEMETRY_<serial_no>_<user_defined_filename>_Host.bin, where <serial no> is the serial number of the device and timestamp is the time of the command executed. The timestamp is in month, day, hour, minute and second format.
</xsl:text>
</xsl:when>
<!--omconfig storage -? -->
<xsl:when test="$id='6971'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">controller</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports controller configuration commands.<!--XLATESTOP-->
</xsl:when>
<!--omconfig storage controller -? -->
<xsl:when test="$id='6972'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">controller</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports controller configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Note: If the PERC hardware controller is running in HBA mode, only Export Log task is supported.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rescan
Required parameters are:
controller=id
performs rescan on the given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enablealarm
Required parameters are:
controller=id
enables alarm on the given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=disablealarm
Required parameters are:
controller=id
disables alarm on the given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=quietalarm
Required parameters are:
controller=id
quiets alarm on the given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=testalarm
Required parameters are:
controller=id
tests alarm by sounding the alarm for about 2 seconds</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=resetconfig
Required parameters are:
controller=id
Optional parameters are:
force=yes
resets configuration on the given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=createvdisk
Required parameters are:
controller=id
raid=<c | r0 | r1 | r1c | r5 | r10 | r50 | r6 | r60>
size=[<number><b | m | g> | <max | min>]
pdisk=<PDISKID,PDISKID,.....>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
Optional parameters are:
stripesize=< 2kb | 4kb | 8kb | 16kb | 32kb | 64kb | 128kb | 256kb | 512kb | 1mb>
cachepolicy=<d | c>
readpolicy=<ra | nra | ara | rc | nrc>
writepolicy=<wb | wt | wc | nwc |fwb>
diskcachepolicy=<unchanged | disabled | enabled>
Note : unchanged is applicable only for PERC 9 or later family of hardware controllers.
name=<string>
spanlength=<n>
secureflag=yes
vdpienabled=yes
lets user create a virtual disk on given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=createcachecade
Required parameters are:
controller=id
pdisk=<PDISKID,PDISKID,.....>
Optional parameters are:
name=<string>
lets user create a cachecade on given controller
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setrebuildrate
Required parameters are:
controller=id
rate=<0 to 100>
sets controller rebuild rate property</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setchangecontrollerproperties
Required parameters are controller id and one of the following optional parameters:
controller=id
Optional parameters are:
bgirate=rate
reconstructrate=rate
checkconsistencyrate=rate
rebuildrate=rate
clearredundantpath=clear
abortcheckconsistencyonerror=enabled/disabled
loadbalance=auto/disabled
allowrevertiblehotspareandreplacemember=enabled/disabled
autoreplacememberonpredictivefailure=enabled/disabled
persistenthotspare=enabled/disabled
nrdiskcachepolicy=enabled/disabled/unchanged
rate=<0 to 100>
lets user set one or more of the above properties
Note : Disk Cache Policy is applicable to Non-RAID Hard Disk Drives only.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=discardpreservedcache
Required parameters are:
controller=id
force=enabled/disabled
discards the controller preserved cache</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=createsecuritykey
Required parameters are:
controller=id
keyid=[keyid]
passphrase=[passphrase]
Optional parameters are:
escrow=yes
creates the Encryption key for the controller.
A Encryption key identifier is a user- supplied label that helps you to associate a Passphrase to a controller.
Encryption Key Identifier can contain numerals, lower case alphabets, uppercase alphabets, non-alphanumeric letter (except space), or a combination of all.
A Passphrase must have a minimum of 8 and a maximum of 32 characters, with at least one numeral, one lowercase alphabet, one uppercase alphabet, and one non-alphanumeric character (except space).
Note : Some of the non-alphanumeric characters might not work. Use the non-alphanumeric characters that your terminal supports.
Note :If escrow option is selected, the escrow file(dellemc_<ControllerModel>_<SASAddress>.xml) will be generated. The location of the file will be C:\Windows (for Windows OS) and /var/log (for Linux/ESXi OS) on managed node.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=changesecuritykey
Required parameters are:
controller=id
keyid=[keyid]
passphrase=[passphrase]
oldpassphrase=[oldpassphrase]
Optional parameters are:
escrow=yes
changes the Encryption key for the controller if correct old passphrase is provided
A Encryption key identifier is a user- supplied label that helps you to associate a Passphrase to a controller.
Encryption Key Identifier can contain numerals, lower case alphabets, uppercase alphabets, non-alphanumeric letter (except space), or a combination of all.
A Passphrase must have a minimum of 8 and a maximum of 32 characters, with at least one numeral, one lowercase alphabet, one uppercase alphabet, and one non-alphanumeric character (except space).
Note : Some of the non-alphanumeric characters might not work. Use the non-alphanumeric characters that your terminal supports.
Note :If escrow option is selected, the escrow file(dellemc_<ControllerModel>_<SASAddress>.xml) will be generated. The location of the file will be C:\Windows (for Windows OS) and /var/log (for Linux/ESXi OS) on managed node.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=deletesecuritykey
Required parameters are:
controller=id
deletes the Encryption key for the controller which has Encryption key set
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enablelkm
Required parameters are:
controller=id
keyid=[keyid]
passphrase=[passphrase]
Optional parameters are:
escrow=yes
creates the Local Key Management Encryption key for the controller if new passphrase and keyid is provided
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=switchtolkm
Required parameters are:
controller=id
keyid=[keyid]
passphrase=[passphrase]
Optional parameters are:
escrow=yes
switches from the Dell Key Manager to Local Key Management for the controller if the keyid and passphrase is provided
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=switchtodkm
Required parameters are:
controller=id
keyid=[keyid]
lkmpassphrase=[lkmpassphrase]
Optional parameters are:
escrow=yes
switches from the Local Key Management to Dell Key Manager for the controller if the keyid and lkmpassphrase is provided
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enabledkm
Required parameters are:
controller=id
creates the Dell Key Manager Encryption Key for the controller
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rekeydkm
Required parameters are:
controller=id
changes the Dell Key Manager Encryption Key for the controller
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rekeylkm
Required parameters are:
controller=id
keyid=[keyid]
passphrase=[passphrase]
Optional parameters are:
escrow=yes
changes the Local Key Management Encryption Key for the controller
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setbgirate
Required parameters are:
controller=id
rate=<0 to 100>
sets controller bgi rate property</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setreconstructrate
Required parameters are:
controller=id
rate=<0 to 100>
sets controller reconstruct rate property</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setcheckconsistencyrate
Required parameters are:
controller=id
rate=<0 to 100>
sets controller check consistency rate property</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=exportlog
Required parameters are:
controller=id
exports the controller log to windows folder on Windows and /var/log on Linux. Depending on the controller, the log file name will be either afa_<mmdd>.log or lsi_<mmdd>.log where <mmdd> is the month and date</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=importsecureforeignconfig
Required parameters are:
controller=id
passphrase=[passphrase for foreign configuration to be imported]
Unlocks the encrypted Local Key Management foreign configuration drives</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unlockdkmforeignconfig
Required parameters are:
controller=id
Unlocks the encrypted Dell Key Manager foreign configuration drives</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=importforeignconfig
Required parameters are:
controller=id
imports configuration from foreign disks</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=importrecoverforeignconfig
Required parameters are:
controller=id
imports or recovers foreign, degraded, or failed virtual disks residing on foreign physical disks</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=clearforeignconfig
Required parameters are:
controller=id
clears configuration on foreign disks</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setpdiskpwrmanagement
Required parameters are:
controller=id
spindownunconfigureddrives=enabled/disabled
spindownhotspares=enabled/disabled
spindownconfigureddrives=enabled/disabled
idlec=enabled/disabled
spindowntimeinterval=<30 to 1440>(minutes)
spinupstarttime=<HH:MM:AM/PM>
spinuptimeinterval=<1 to 24>(hours)
performs spindown configurations on physical disks and virtual disks
NOTE: On PERC 7 and PERC H310 controllers, only spindownunconfigureddrives,
spindownhotspares, and spindowntimeinterval parameters are supported.
NOTE: You can specify spinupstarttime and spinuptimeinterval only when you set
spindownconfigureddrives=enabled.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setcontrollermode
Required parameters are:
controller=id
mode=raid|hba|enhancedhba
set controller mode to raid/hba/enhancedhba
Note: Controller mode can not be changed to HBA or Enhanced HBA if the controller
has VD(s), hotspare or encryption key enabled.
Successful command needs rebooting of the system to get the mode change in effect.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=autoconfigureRAID0
Required parameters are:
controller=id
Auto configure RAID0 with all remaining ready state disks</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setautoconfigurebehavior
Required parameters are:
controller=id
mode=off|nonraiddisk|r0
Set autoconfigure behavior mode to off/nonraiddisk/r0.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setpatrolreadmode
Required parameters are:
controller=id
mode=manual|auto|disable
set patrol read mode to manual or auto or disabled</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=startpatrolread
Required parameters are:
controller=id
start patrol read. This action is possible only when patrol read mode is manual</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=stoppatrolread
Required parameters are:
controller=id
stop patrol read. This action is possible only when patrol read mode is manual</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=convertraidtononraid
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
converts Multiple RAID to Non-RAID on the given controller</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=convertnonraidtoraid
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
converts Multiple Non-RAID to RAID on the given controller</xsl:text>
</xsl:when>
<xsl:when test="$id='6981'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">vdisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports virtual disk configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id='6982'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">vdisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports virtual disk configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=checkconsistency
Required parameters are:
controller=id
vdisk=id
initiates check consistency operation on given virtual disk </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelcheckconsistency
Required parameters are:
controller=id
vdisk=id
cancels check consistency operation on given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=pausecheckconsistency
Required parameters are:
controller=id
vdisk=id
pauses check consistency operation on given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=resumecheckconsistency
Required parameters are:
controller=id
vdisk=id
resumes check consistency operation on given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=blink
Required parameters are:
controller=id
vdisk=id
blinks the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unblink
Required parameters are:
controller=id
vdisk=id
unblinks the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=initialize
Required parameters are:
controller=id
vdisk=id
initializes the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=fastinit
Required parameters are:
controller=id
vdisk=id
Optional parameters are:
force=yes
performs a fast initialization on the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=slowinit
Required parameters are:
controller=id
vdisk=id
Optional parameters are:
force=yes
performs a slow initialization on the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelinitialize
Required parameters are:
controller=id
vdisk=id
cancels initialization on the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelbginitialize
Required parameters are:
controller=id
vdisk=id
cancels background initialization on the given virtual Disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=restoresegments
Required parameters are:
controller=id
vdisk=id
recovers disk space occupied by a dead disk segment</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=splitmirror
Required parameters are:
controller=id
vdisk=id
converts a mirror set into two concatenated or RAID 0 sets without erasing
any redundant data</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unmirror
Required parameters are:
controller=id
vdisk=id
converts a mirror set into 1 concatenated set or RAID 0 set without erasing
any redundent data and restores the other half of the mirror set to free space.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=assigndedicatedhotspare
Required parameters are:
controller=id
vdisk=id
assign=<yes | no>
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
assigns/unassigns a physical disk to the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=deletevdisk
Required parameters are:
controller=id
vdisk=id
Optional parameters are:
force=yes
deletes the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=format
Required parameters are:
controller=id
vdisk=id
formats the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=reconfigure
Required parameters are:
controller=id
vdisk=id
raid=<c | r0 | r1 | r1c | r5 | r6 | r10>
pdisk=<PDISKID,PDISKID,.....>
Optional parameters are:
size=<size>
vdcapacityexpansion=yes
sizeinpercent=<1 to 100>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
changes RAID level of a virtual disk or expand the virtual disk either by adding new physical disks or resizing the virtual disk.
Note : If 'vdcapacityexpansion' parameter is not selected, 'size' should be provided.
Note : If 'vdcapacityexpansion' parameter is selected, instead of 'size', 'sizeinpercent' should be provided.
Note : The additional physical disk for reconfigure must be of supported bus protocol, media type, sector size, T10 Protection Information capability, and encryption capability.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=securevd
Required parameters are:
controller=id
vdisk=id
encrypt the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=clearvdbadblocks
Required parameters are:
controller=id
vdisk=id
clears bad block for the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=changepolicy
Required parameters are:
controller=id
vdisk=id
Optional parameters are:
readpolicy=<ra | nra | ara | rc | nrc>
writepolicy=<wb | wt | wc | nwc | fwb>
cachepolicy=<d | c>
diskcachepolicy=<unchanged | disabled | enabled>
Note : unchanged is applicable only for PERC 9 or later family of hardware controllers.
lets user modify read, write and/or cache policy of the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=replacememberdisk
Required parameters are:
controller=id
vdisk=id
source=<PDISKID>
destination=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
replaces the member of given virtual disk with given destination disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rename
Required parameters are:
controller=id
vdisk=id
name=<string>
renames the given virtual disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enablefluidcache
Required parameters are:
controller=id
vdisk=id
devicename=<string>
cachepolicy=<wb( for specifying writeback) or wt( for specifying writethrough)>
enables Fluid Cache for the specified virtual disk.A new Fluid Cache Disk /dev/fldc_x_ shall be created as a result of enabling Fluid Cache. You MUST use the new Fluid Cache Disk /dev/fldc_x_ for all data access moving forward. Any additional data access to the corresponding Virtual Disk /dev/sd_x_ or its partitions being cached may lead to data corruption.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=disablefluidcache
Required parameters are:
controller=id
vdisk=id
devicename=<string>
disables the fluid cache capability for the specified virtual disk
</xsl:text>
<xsl:text>
action=reactivate
Required parameters are:
controller=id
vdisk=id
devicename=<string>
reactivates the fluid cache for the specified virtual disk
</xsl:text>
</xsl:when>
<!-- Adisk command should be deprecated -->
<xsl:when test="$id = '6991'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">adisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports array disk configuration commands. DEPRECATED: please use pdisk<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6992'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">adisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports array disk configuration commands. DEPRECATED: please use pdisk<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=blink
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
blinks the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unblink
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
unblinks the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=remove
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
prepares the array disk for removal</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=initialize
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
initializes the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=offline
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
offlines the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=online
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
onlines the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=assignglobalhotspare
Required parameters are:
controller=id
adisk=<ADISKID>
assign=<yes | no>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
assigns/unassigns the given array disk as global hot spare.
Note : The input physical disk can only protect virtual disks of same bus protocol, media type, sector size, T10 Protection Information capability, and encryption capability. </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rebuild
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
rebuilds the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelrebuild
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
cancels rebuild on the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelreplacemember
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
cancels replace member operation on the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=removedeadsegments
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
removes the disk space occupied by a dead disk segment</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=clear
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
clears the given array disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelclear
Required parameters are:
controller=id
adisk=<ADISKID>
where ADISKID=<connector:enclosureID:portID | connector:targetID>
cancels clear operation on the given array disk
DEPRECATED: Please use pdisk instead of adisk</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- pdisk commands -->
<xsl:when test="$id = '6997'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">pdisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports physical disk configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6998'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">pdisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports physical disk configuration commands. <!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=blink
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
blinks the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unblink
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
unblinks the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=remove
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
prepares the physical disk for removal</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=instantsecureerase
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
erases the given SED. Non-NVMe PCIe SSDs also use the same command for Full Initialization. DEPRECATED: Please use cryptographicerase.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cryptographicerase
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
erases the given NVMe device. This option is available only for NVMe devices.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=initialize
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
initializes the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=offline
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
offlines the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=online
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
onlines the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=assignglobalhotspare
Required parameters are:
controller=id
pdisk=<PDISKID>
assign=<yes | no>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
assigns/unassigns the given physical disk as global hot spare.
Note : The input physical disk can only protect virtual disks of same bus protocol, media type, sector size, T10 Protection Information capability, and encryption capability. </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rebuild
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
rebuilds the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelrebuild
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
cancels rebuild on the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelreplacemember
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
cancels replace member operation on the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=removedeadsegments
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
removes the disk space occupied by a dead disk segment</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=clear
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
clears the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=cancelclear
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
cancels clear operation on the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=convertraidtononraid
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
converts RAID to Non-RAID on the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setarraydiskcache
Required parameters are:
controller=id
cache=<default | disabled | enabled>
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
set disk cache policy on the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=convertnonraidtoraid
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
converts Non-RAID to RAID on the given physical disk</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enabledevicewritecache
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
enables Write Cache on the given physical disk for the PCIe SSD controllers</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=disabledevicewritecache
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
disables Write Cache on the given physical disk for the PCIe SSD controllers</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=exportlog
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
Optional parameters are:
Filename=<filename>
exports the PCIe SSD or NVMe device log to windows folder on Windows and /var/log on Linux. Depending on the PCIe SSD or NVMe device, the log file name will be PCIeSSD_<serial no>_<timestamp>.log or NVME_<serial no>_<timestamp>.log where <serial no> is the serial number of the device and timestamp is month, day, hour, minute and second during which the command is executed.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=exporttelemetrylog
Required parameters are:
controller=id
pdisk=<PDISKID>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
Optional parameters are:
Filename=<filename>
exports the PCIe SSD or NVMe device telemetry log to windows folder on Windows and /var/log on Linux. The default telemetry log file name will be NVME_TELEMETRY_<serial no>_<timestamp>_Host.bin and the user-defined file name displays as NVME_TELEMETRY_<serial_no>_<user_defined_filename>_Host.bin, where <serial no> is the serial number of the device and timestamp is the time of the command executed. The timestamp is in month, day, hour, minute and second format.</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- pciessd commands -->
<xsl:when test="$id = '6931'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">pciessd</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports pciessd device configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6932'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">pciessd</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports pciessd device configuration commands. <!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=addtocachepool
adds the specified pciessd device to the cache pool.
Required Parameters are
subsystem=id
pciedevice=<PDISKID>
force=yes
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=removefromcachepool
removes the specified pciessd device to the cache pool.
Required Parameters are
subsystem=id
pciedevice=<PDISKID>
force=yes
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=reactivate
reactivates the specified pciessd device that was part of the cache pool.
Required Parameters are
subsystem=id
pciedevice=<PDISKID>
force=yes
</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- fluidcache commands -->
<xsl:when test="$id = '6082'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">fluidcache</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports fluidcache configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6083'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">fluidcache</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports fluidcache configuration commands. <!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=applylicense
Applies/Updates the license to the fluid cache system.
Required Parameters are
licensefile=<filename(with absolute path)>
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=connect
Establishses connection with fluid cache system and updates the cache configuration details under storage subsystem.
</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- partition commands -->
<xsl:when test="$id = '6096'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">partition</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports partition configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6097'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">partition</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports partition configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=refresh
Refreshes the partition list maintained in the storage subsytem.
</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- fluidcachedisks commands -->
<xsl:when test="$id = '6086'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">fluidcachedisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports fluid cached disk configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6087'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">fluidcachedisk</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports fluid cache disk configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=disablewithdiscard
Discards the data on the cache and disables caching on the specified fluid cache disk.
Required Parameters are
fluidcachedisk=<string>
</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<!-- global info help-->
<xsl:when test="$id = '6994'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">globalinfo</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports global storage configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id = '6995'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">globalinfo</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports global storage configuration commands. <!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=enablests
enables smart thermal shutdown </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=disablests
disables smart thermal shutdown </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setRemainingRatedWriteEnduranceThreshold
Required parameters are:
type=sassata or pciessd
threshold=Any value between 1 to 100
Set the RRWE threshold for SAS/SATA/PCIe SSDs</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setavailablesparethreshold
Required parameters are:
type=pciessd
Atleast one of the following threshold values must be set for available spare
warning_threshold=Any value between 1 and 99
critical_threshold=Any value between 1 and 99
Set the available spare threshold for PCIe SSDs</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=globalrescan
performs rescan on all controllers and connectors</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setnondellcertifiedmode
Required parameters are:
mode=no for blocking alerts
mode=yes for unblocking alerts
set flag to block/unblock specific alerts for non-Dell certified drives.</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=setprotectionpolicies
Required parameters are
type=ghs or dhs (specify only one at a time)
raid=(r1,r5,r6,r10,r50,r60,all) only one of this at a given time
hscount=0-16. Use 0 to reset
warnlevel=0/1/2/3 (0-reset, 1-informational, 2-warning, 3-critical)
allows users to set hotspare protection policies for supported SAS controllers only
To reset please set hscount and warnlevel both to 0 simultaneously
Parameter includeghsinvdstate=(yes|no) must be specified when the type is ghs and not dhs
</xsl:text>
<xsl:call-template name="NewLine"/>
</xsl:when>
<xsl:when test="$id = '6996'">
<!--XLATESTART-->Display cachecade(s) properties.<!--XLATESTOP-->
<xsl:if test="$shownvpairs = 'true'">
<xsl:call-template name="NewLine"/>
<xsl:call-template name="NewLine"/>
<!--XLATESTART-->Optional parameters are:<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id </xsl:text>
<!--XLATESTART--> All cachecade(s) on the specified controller<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>controller=id cachecade=id </xsl:text>
<!--XLATESTART-->The specified cachecade<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
</xsl:if>
</xsl:when>
<xsl:when test="$id='6990'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">cachecade</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports cachecade(s) configuration commands.<!--XLATESTOP-->
</xsl:when>
<xsl:when test="$id='6993'">
<xsl:call-template name="CLISubCommand">
<xsl:with-param name="command">cachecade</xsl:with-param>
</xsl:call-template>
<!--XLATESTART-->Supports cachecade(s) configuration commands.<!--XLATESTOP-->
<xsl:call-template name="NewLine"/>
<xsl:text>
action=blink
Required parameters are:
controller=id
cachecade=id
blinks the given cachecade</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=unblink
Required parameters are:
controller=id
cachecade=id
unblinks the given cachecade</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=deletecachecade
Required parameters are:
controller=id
cachecade=id
Optional parameters are:
force=yes
deletes the given cachecade</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=resize
Required parameters are:
controller=id
cachecade=id
pdisk=<PDISKID,PDISKID,.....>
where PDISKID=<connector:enclosureID:portID | connector:targetID>
resize the cachecade by adding/removing physical disks.
</xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>
action=rename
Required parameters are:
controller=id
cachecade=id
name=<string>
renames the given cachecade</xsl:text>
</xsl:when>
<!--Storage services specific user error messages -->
<xsl:when test="$id='1600'">
<!--XLATETHIS-->Invalid controller value. Read, controller=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<xsl:choose>
<xsl:when test="$parsetxt2=''">No controllers found.</xsl:when>
<xsl:otherwise><!--XLATETHIS-->Valid values for controller are: <xsl:value-of select="$parsetxt2"/><!--XLATETHIS--></xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$id='1601'">
<!--XLATETHIS-->Invalid connector value. Read, connector=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for connector are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1602'">
<!--XLATETHIS-->Invalid physical disk value. Read, pdisk=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Physical disks present on the controller are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1741'">
<!--XLATETHIS-->Disk is either invalid or nonSSD or not in ready state. Read, pdisk=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for physical disk are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1742'">
<!--XLATETHIS-->Disk is either invalid or not provided.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1743'">
<!--XLATETHIS--> This command can not be processed as number of disks provided are more than 32.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1744'">
<!--XLATETHIS-->Invalid Request as spinuptimeinterval value should be an integer and in the range 1-24 hours.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1745'">
<!--XLATETHIS-->Invalid Spin Up StartTime value.Spin Up Start Time value should be in the <HH:MM:AM/PM> format.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1746'">
<!--XLATETHIS-->No Input value for the spindowntimeinterval.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1747'">
<!--XLATETHIS-->No Input value the spinupstarttime and spinuptimeinterval.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1748'">
<!--XLATETHIS-->Invalid Parameters.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1603'">
<!--XLATETHIS-->Invalid target value.<!--XLATETHIS-->
<xsl:value-of select="$nametxt"/>, <xsl:value-of select="$paramtxt"/>, <xsl:value-of select="$parsetxt"/>, <xsl:value-of select="$parsetxt2"/>
</xsl:when>
<xsl:when test="$id='1604'">
<!--XLATETHIS-->Invalid vdisk value. Read, vdisk=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for vdisk are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1605'">
<!--XLATETHIS-->Invalid enclosure value. Read, enclosure=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for enclosure are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1606'">
<!--XLATETHIS-->Invalid size value<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1607'">
<!--XLATETHIS-->Invalid units for size value.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid units are bytes, megabytes and gigabytes.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->e.g 123456789b for bytes, 250m for megabytes or 33g for gigabytes.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1608'">
<!--XLATETHIS-->No free space on given physical disk.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
</xsl:when>
<xsl:when test="$id='1609'">
<!--XLATETHIS-->Raid input value not supported on given controller. Read,raid=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for raid are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1610'">
<!--XLATETHIS-->Read policy input value not supported on given controller. Read,readpolicy=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for readpolicy are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1611'">
<!--XLATETHIS-->Write policy input value not supported on given controller. Read,writepolicy=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for writepolicy are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1612'">
<!--XLATETHIS-->Cache policy input value not supported on given controller. Read,cachepolicy=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for cachepolicy are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1613'">
<!--XLATETHIS-->Stripe size input value not supported on given controller. Read,stripesize=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for stripesize are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1614'">
<!--XLATETHIS-->Operation not supported. Read, action=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>Refer to the documentation for more information.
</xsl:when>
<xsl:when test="$id='1615'">
<!--XLATETHIS-->Operation disabled. Read, action=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->
<!--XLATETHIS-->Refer to the documentation for more information.
</xsl:when>
<xsl:when test="$id='1616'">
<!--XLATETHIS-->Input value for fan index not supported on given enclosure. Read,index=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for fan index is: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1617'">
<!--XLATETHIS-->Input value for temps index not supported on given enclosure. Read,index=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for temps index is: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1618'">
<!--XLATETHIS-->Input value for pwrsupplies index not supported on given enclosure. Read,index=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for pwrsupplies index is: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1619'">
<!--XLATETHIS-->Input value for emms index not supported on given enclosure. Read,index=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Supported values for emms index is: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1620'">
<!--XLATETHIS-->Invalid battery value. Read, battery=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for battery are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1621'">
<!--XLATETHIS-->Invalid virtual disk name. Read, name=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid name characters are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1622'">
<!--XLATETHIS-->Invalid vdisk value. Read, vdisk=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->No virtual disks were found on controller <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1623'">
<!--XLATETHIS-->The virtual disk cannot be created on the physical disks you selected. Possible reasons include: Insufficient disk space, available disks are not initialized, incorrect number of disks selected, unsupported RAID level selection, unsupported mix of SAS and SATA type disks, unsupported mix of SSD and HDD type disks, unsupported mix of 512Bytes and 4KBytes sector size disks, unsupported mix of PI capable and incapable type disks, controller restrictions or unsupported configuration.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1624'">
<!--XLATETHIS-->Invalid min/max warn values. <xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for minwarn are: <xsl:value-of select="$parsetxt"/>
<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for maxwarn are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1625'">
<!--XLATETHIS-->Invalid enclosure asset tag. Read, assettag=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid name characters are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1626'">
<!--XLATETHIS-->Invalid enclosure asset name. Read, assetname=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid name characters are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1627'">
<!--XLATETHIS-->Invalid physical disk value. Read, pdisk=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Hot spare is not allowed in physical disk list.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1628'">
<!--XLATETHIS-->No batteries found<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1629'">
<!--XLATETHIS-->Invalid physical disk value. Read, pdisk=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->The physical disk cannot be assigned as dedicated hot spare to the virtual disk you selected. Possible reasons include: Invalid physical disk id, insufficient physical disk space, unsupported mix of SAS and SATA type physical disks.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for physical disk are: <xsl:value-of select="$parsetxt2"/>
</xsl:when>
<xsl:when test="$id='1630'">
<!--XLATETHIS-->Invalid virtual disk name. Read, name=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum virtual disk name length allowed is: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1631'">
<!--XLATETHIS-->SpanLength parameter is missing. Specify spanlength to create a Raid 50 virtual disk.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1632'">
<!--XLATETHIS-->Invalid spanlength value. Read, spanlength=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->The value of the span length should be an even number and should be less than or equal to half the number of disks available. Minimum span length for RAID 10 is 2.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1633'">
<!--XLATETHIS-->Invalid parameter: spanlength<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Spanlength is required for a Raid 50 virtual disk.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1634'">
<!--XLATETHIS-->No temperature probes were found on enclosure <xsl:value-of select="$parsetxt"/>.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1635'">
<!--XLATETHIS-->Raid 1 virtual disk should use two physical disks.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1636'">
<!--XLATETHIS-->Raid 5 virtual disk should use at least 3 physical disks.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1637'">
<!--XLATETHIS-->Raid 10 or Raid1Concat virtual disk should use at least 4 physical disks and the number of physical disks should be even.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1638'">
<!--XLATETHIS-->Raid 50 virtual disk should use at least 6 physical disks.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1639'">
<!--XLATETHIS-->New and old names for the virtual disk are the same. Read, name=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1640'">
<!--XLATETHIS-->New and old asset tags are the same. Read, name=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1641'">
<!--XLATETHIS-->New and old asset names are the same. Read, name=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1642'">
<!--XLATETHIS-->The maximum number of virtual disks for this controller has been reached.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum number of virtual disks allowed: <xsl:value-of select="$parsetxt"/>.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1643'">
<!--XLATETHIS-->Invalid command. Read, info=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1644'">
<!--XLATETHIS-->Invalid mindrives value. Read, mindrives=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->
<!--XLATETHIS-->mindrives should be less than or equal to the number of physical disks specified.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1645'">
<!--XLATETHIS-->Invalid command. Read, mindrives=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->
<!--XLATETHIS-->mindrives should be specified only in combination with physical disk values.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1646'">
<!--XLATETHIS-->Invalid virtual disk size value. Valid virtual disk size range for the physical disks selected are:<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Minimum virtual disk size = <xsl:value-of select="$parsetxt"/>mb<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum virtual disk size = <xsl:value-of select="$parsetxt2"/>mb<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1647'">
<!--XLATETHIS-->The new values for minimum and maximum temperature thresholds are the same as the current values.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Minimum Warning Threshold = <xsl:value-of select="$parsetxt"/>
<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum Warning Threshold = <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1648'">
<!--XLATETHIS-->The new value for rebuild rate is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1650'">
<!--XLATETHIS-->Invalid service request command. Please contact your service representative for support.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1651'">
<!--XLATETHIS-->Invalid parameter: spanlength<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Specify the span length only if you are creating a RAID 10 (optional parameter), RAID 50, or RAID 60 virtual disk.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1652'">
<!--XLATETHIS-->User input and current read policies are the same. Read, readpolicy=<!--XLATETHIS--><xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1653'">
<!--XLATETHIS-->User input and current write policies are the same. Read, writepolicy=<!--XLATETHIS--><xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1654'">
<!--XLATETHIS-->User input and current cache policies are the same. Read, cachepolicy=<!--XLATETHIS--><xsl:value-of select="$parsetxt"/>
</xsl:when>
<!--Error code 1655 is generated when malloc() fails or an expected required paarmeter is missing. Should never hit this case... -->
<xsl:when test="$id='1655'">
<!--XLATETHIS-->CLI sub-system critical error.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1656'">
<!--XLATETHIS-->The new value for bgi rate is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1657'">
<!--XLATETHIS-->The new value for patrol read rate is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1658'">
<!--XLATETHIS-->The new value for reconstruct rate is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1659'">
<!--XLATETHIS-->The new value for check consistency rate is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1660'">
<!--XLATETHIS-->Invalid mode value. Read, mode=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for mode are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1661'">
<!--XLATETHIS-->Patrol Read Rate is not applicable or cannot be set for this controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1662'">
<!--XLATETHIS-->Invalid delay learn amount: <xsl:value-of select="$parsetxt"/><!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum allowed delay learn amount: <xsl:value-of select="$parsetxt2"/><!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1663'">
<!--XLATETHIS-->Invalid asset tag: <xsl:value-of select="$parsetxt"/><!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum allowed asset tag length: <xsl:value-of select="$parsetxt2"/><!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1664'">
<!--XLATETHIS-->Invalid asset name: <xsl:value-of select="$parsetxt"/><!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Maximum allowed asset name length: <xsl:value-of select="$parsetxt2"/><!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1665'">
<!--XLATETHIS-->Invalid size parameter: reconfiguration size can not be specified by the user on this controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1667'">
<!--XLATETHIS-->Error! Required parameter missing: pdisk<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1668'">
<!--XLATETHIS-->Error! Cannot use both pdisk and adisk parameters.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1670'">
<!--XLATETHIS-->Invalid spanlength value. Read, spanlength=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1671'">
<!--XLATETHIS-->SpanLength parameter is missing. Specify spanlength to create a Raid 60 virtual disk.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1672'">
<!--XLATETHIS-->Raid 6 virtual disk should use at least 4 physical disks.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1673'">
<!--XLATETHIS-->Raid 60 virtual disk should use at least 8 physical disks.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1674'">
<!--XLATETHIS-->Disk Cache Policy is not supported on given controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1675'">
<!--XLATETHIS-->Disk Cache Policy is same as the current disk cache policy.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1676'">
<!--XLATETHIS-->Invalid source value. Read, source=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for source physical disk are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1677'">
<!--XLATETHIS-->The new value for abortcheckconsistencyonerror is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1678'">
<!--XLATETHIS-->The new value for allowrevertiblehotspareandreplacemember is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1679'">
<!--XLATETHIS-->The new value for autoreplacememberonpredictivefailure is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1680'">
<!--XLATETHIS-->The new value for loadbalance is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1681'">
<!--XLATETHIS-->The new learn mode for battery is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1682'">
<!--XLATETHIS-->Change Learn Mode is not applicable or cannot be set for this controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1684'">
<!--XLATETHIS-->Invalid virtual disk size value. Valid virtual disk size range for the physical disks selected are:<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Virtual disk size = <xsl:value-of select="$parsetxt"/>mb<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1685'">
<!--XLATETHIS-->Invalid spanlength value. Read, spanlength=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Minimum spanlength value for RAID50 is: 3.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1686'">
<!--XLATETHIS-->Invalid spanlength value. Read, spanlength=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Minimum spanlength value for RAID60 is: 4.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1687'">
<!--XLATETHIS-->Please specify atleast one or more properties for the controller to be set.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1688'">
<!--XLATETHIS-->allowrevertiblehotspareandreplacemember cannot be disabled, unless autoreplacememberonpredictivefailure is disabled.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1689'">
<!--XLATETHIS-->Enable allowrevertiblehotspareandreplacemember before enabling autoreplacememberonpredictivefailure.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1690'">
<!--XLATETHIS-->Invalid spanlength value. Read, spanlength=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Only supported spanlength for RAID10 in this controller is: 2.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1691'">
<!--XLATETHIS-->Invalid destination value. Read, destination=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for destination physical disk are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1692'">
<!--XLATETHIS-->Invalid value for the force.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1693'">
<!--XLATETHIS-->The range for hscount is 0-16. use 0 for reset. set warnlevel also to 0 for reset<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1694'">
<!--XLATETHIS-->Valid values for warnlevel are 0-reset, 1-informational, 2-warning, 3-critical. set hscount also to 0 for reset<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1695'">
<!--XLATETHIS-->Invalid combination of values for warnlevel and hscount. set both hscount and warnlevel to 0 for reset<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1696'">
<!--XLATETHIS-->includeghsinvdstate should be used only when the type is ghs<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1697'">
<!--XLATETHIS-->Error! raid parameter missing. valid values for raid=(r1|r5|r6|r10|r50|r60|all)<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1698'">
<!--XLATETHIS-->Error! raid parameter should not be specified when type is ghs<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1699'">
<!--XLATETHIS-->Error! includeghsinvdstate parameter missing. valid values for includeghsinvdstate=(yes|no)<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1700'">
<!--XLATETHIS-->Maximum allowed dedicated hotspare is 16. This includes the already assigned dedicated hotspare<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1701'">
<!--XLATETHIS-->Error! Spanlength cannot be configured for the selected RAID level on the specified controller<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1702'">
<!--XLATETHIS-->Disk Cache policy configuration not supported on given controller during virtual disk creation. Disk Cache policy can be modified after virtual disk creation.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1703'">
<!--XLATETHIS-->Error! Invalid <xsl:value-of select="$parsetxt"/> value Read. <xsl:value-of select="$parsetxt"/>=<xsl:value-of select="$parsetxt2"/> Min. length is 8 and max len is 32. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1704'">
<!--XLATETHIS-->Error! Invalid <xsl:value-of select="$parsetxt"/> value Read. <xsl:value-of select="$parsetxt"/>=<xsl:value-of select="$parsetxt2"/> At least 1 digit [0-9] is required.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1705'">
<!--XLATETHIS-->Error! Invalid <xsl:value-of select="$parsetxt"/> value Read. <xsl:value-of select="$parsetxt"/>=<xsl:value-of select="$parsetxt2"/> At least one upper and lower case required.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1706'">
<!--XLATETHIS-->Error! The parameter encrypt can take only a valid value of yes<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1707'">
<!--XLATETHIS-->Error! Invalid <xsl:value-of select="$parsetxt"/> value Read. <xsl:value-of select="$parsetxt"/>=<xsl:value-of select="$parsetxt2"/> At least one special case required.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1708'">
<!--XLATETHIS-->Virtual disk name configuration not supported for this controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1709'">
<!--XLATETHIS-->Error! Invalid characters for key id<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1710'">
<!--XLATETHIS-->Error! Invalid includeghsinvdstate value. The value of includeghsinvdstate should be no when the value of hscount is 0 and the value of warnlevel is 0.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1711'">
<!--XLATETHIS-->Error! Invalid value for info. The value of info should either be foreignkeyids or pdslotreport.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1712'">
<!--XLATETHIS-->Error! Encryption parameter not applicable since Controller is not Encryption Capable<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1713'">
<!--XLATETHIS-->Error! Controller Lock Key is not established. Enable Controller Encryption to create Encryption VD <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1714'">
<!--XLATETHIS-->Error! Storage Management has found one or more Encrypted Foreign configurations. You need to enable the Encryption on the controller to import these encrypted foreign configurations. If you have lost the passphrase and want to clear, use 'Instant Encrypt Erase' task available for physical disk at Physical Disks Information Page <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1715'">
<!--XLATETHIS-->Error! When spanlength is 22 or 26 for RAID10 we need to provide 22 or 26 disks respectively to create a virtual disk. When 22 or 26 disks are provided the spanlength should be 22 or 26 respectively <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1716'">
<!--XLATETHIS-->Invalid request for Dimmer Switch operation.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1717'">
<!--XLATETHIS-->Operation is not supported on given controller<!--XLATETHIS-->
<xsl:call-template name="NewLine"/>Refer to the documentation for more information.
</xsl:when>
<xsl:when test="$id='1718'">
<!--XLATETHIS-->The new value for persistenthotspare is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1719'">
<!--XLATETHIS-->Invalid Request as new value(s) is same as the old value(s).<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1720'">
<!--XLATETHIS-->Invalid Request as spindowntimeinterval value should be an integer and in the range 30-1440.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1721'">
<!--XLATETHIS-->Invalid Request as either/both spindown values of unconfigured or hotspare drives should be enabled.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1722'">
<!--XLATETHIS-->Invalid Request as new value(s) is same as the old value(s).<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1723'">
<!--XLATETHIS-->filepath parameter is not specified. Please check the help.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1724'">
<!--XLATETHIS-->VD capacity expansion is not supported on this controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1725'">
<!--XLATETHIS-->VD capacity expansion parameters are not appropriate.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1726'">
<!--XLATETHIS-->spindowntimeinterval can not be set as both input spindown values are disabled.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1727'">
<!--XLATETHIS-->For VD capacity expansion raid layout input should be the same as the original layout.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1728'">
<!--XLATETHIS-->escrow parameter is wrong. It should either be 'yes' or should not be provided.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1729'">
<!--XLATETHIS-->Encryption key credentials can be escrowed only to xml file. Please provide correct file extension<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1730'">
<!--XLATETHIS-->Error! Some Parameters are missing. Please check the help<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1732'">
<!--XLATETHIS-->Error! Controller is using the same encryption mode.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1733'">
<!--XLATETHIS-->Error! Rekey Dell Key Manager can be done only when the controller is in the Dell Key Manager mode.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1734'">
<!--XLATETHIS-->Error! Controller is in the Dell Key Manager mode or it is not enabled with encryption.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1735'">
<!--XLATETHIS-->Error! Controller is in the Local Key Management mode.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1736'">
<!--XLATETHIS-->Error! Controller does not have the encryption key.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1737'">
<!--XLATETHIS-->Error! Rekey Local Key Management can be done only when the controller is in the Local Key Management mode.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1738'">
<!--XLATETHIS-->CacheCade is not supported on this controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1739'">
<!--XLATETHIS-->Invalid cachecade value. Read, cachecade=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for cachecade are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1740'">
<!--XLATETHIS-->Invalid cachecade value. Read, cachecade=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->No cachecade disks were found on controller <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1731'">
<!--XLATETHIS-->Operation not supported. Read, info=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>Refer to the documentation for more information.
</xsl:when>
<xsl:when test="$id='1749'">
<!--XLATETHIS-->Error! Invalid Key ID or passphrase length. The Key ID can be up to 32 characters. The passphrase can have a minimum of 8 characters and a maximum of 32 characters.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1750'">
<!--XLATETHIS-->Operation not supported. A new virtual disk cannot be created while preserved cache exists. If the failed array can be made healthy, preserved cache can be flushed. If not, discard preserved cache under controller actions and create a new virtual disk.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1751'">
<!--XLATETHIS-->spinuptimeinterval and spinupstarttime can not be set as spindownconfigureddrives are disabled.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1752'">
<!--XLATETHIS-->Invalid Tape Drive value. Read, tape=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid values for Tape Drive(s): <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1752'">
<!--XLATETHIS-->Error! No PCIe subsytem found. Please check your configuration if there is PCIeSubsystem installed.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1753'">
<!--XLATETHIS-->Error! Specified devicename(either Virtualdisk or Partition) is not available.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1754'">
<!--XLATETHIS-->Error! Invalid cachepolicy specified by the user.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1755'">
<!--XLATETHIS-->Error! Invalid OS devicename.Input allowed is alphanumeric except for '/'.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1756'">
<!--XLATETHIS-->Error! Input VirtualDisk ID and Devicename are not matching.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1757'">
<!--XLATETHIS-->Error! Input file doesnot exist.Please specify a valid file.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1758'">
<!--XLATETHIS-->Error! Filepath input is empty. Please specify a valid file using absolute filepath.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1759'">
<!--XLATETHIS-->Error! Invalid fluid cache disk specified Please specify a valid fluidcache disk name.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1760'">
<!--XLATETHIS-->Invalid Service Tag. Read, servicetag=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
<xsl:call-template name="NewLine"/>
<!--XLATETHIS-->Valid characters are: <xsl:value-of select="$parsetxt2"/>
<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1761'">
<!--XLATETHIS-->Error! New and old Service Tags are the same. Read, servicetag=<!--XLATETHIS-->
<xsl:value-of select="$parsetxt"/>
</xsl:when>
<xsl:when test="$id='1762'">
<!--XLATETHIS-->Error! Spanlength is not required for RAID10 on this controller<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1763'">
<!--XLATETHIS-->Error! Span Layout not available<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1764'">
<!--XLATETHIS-->Error! Invalid input value for vdpienabled. For more information, see the help. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1765'">
<!--XLATETHIS-->Error! vdpienabled option is not supported on this controller. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1766'">
<!--XLATETHIS-->Error! Controller is already in the user requested personality state. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1767'">
<!--XLATETHIS-->Error! Encryption key present in Controller. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1768'">
<!--XLATETHIS-->Error! Virtual disk present in Controller. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1769'">
<!--XLATETHIS-->Error! Hotspare present in Controller. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1770'">
<!--XLATETHIS-->Error! Invalid SSD device type Specified. Mention either sassata or pciessd. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1771'">
<!--XLATETHIS-->Error! Threshold should be between 1 - 100. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1772'">
<!--XLATETHIS-->Error! Invalid mode value. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1773'">
<!--XLATETHIS-->Error! The new threshold value is same as the current value. <!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1774'">
<!--XLATETHIS-->The Auto Configure RAID0 operation is in progress. Retry the task later.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1775'">
<!--XLATETHIS-->Invalid disk write cache policy.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1776'">
<!--XLATETHIS-->Controller is already in the user requested disk write cache policy for Non-RAID disks.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1777'">
<!--XLATETHIS-->Disk is already in the user requested disk write cache policy.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1778'">
<!--XLATETHIS-->Please provide the valid filename<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1779'">
<!--XLATETHIS-->Error! Invalid SSD device-type specified. Valid device-type is pciessd.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1780'">
<!--XLATETHIS-->Error! The threshold value must be between 1 - 99.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1781'">
<!--XLATETHIS-->The new threshold value is the same as the current value.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1782'">
<!--XLATETHIS-->ERROR! This device is currently mounted (<xsl:value-of select="$parsetxt"/>) and may still be in use. We recommend un-mounting all of the drive's mount points before continuing.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1783'">
<!--XLATETHIS-->ERROR! This device may still be in use. We recommend that you stop all applications accessing the device before continuing.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1784'">
<!--XLATETHIS-->The virtual disk with RAID 10 configuration cannot be created for the selected number of physical disks. Please refer OM CLI guide for details.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1785'">
<!--XLATETHIS-->Error! System Configuration Lockdown mode is turned ON. Configuration actions cannot be performed in this mode.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1786'">
<!--XLATETHIS-->Controller does not support enhanced HBA Mode.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1787'">
<!--XLATETHIS-->Non-Raid Disk Present.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1788'">
<!--XLATETHIS-->Error! Unable to change controller mode while foreign configuration is present on the controller.<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1789'">
<!--XLATETHIS-->Number of Drives Selected Must be Greater than twice the Span Length and should be an Integral multiple of Span Length<!--XLATETHIS-->
<xsl:call-template name="NewLine"/><!--XLATETHIS-->Operation failed!!!<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1790'">
<!--XLATETHIS-->No Enclosures Found<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1791'">
<!--XLATETHIS-->Read Policy for VD creation is not supported for this config.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1792'">
<!--XLATETHIS-->Write Policy for VD creation is not supported for this config.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1793'">
<!--XLATETHIS-->Controller does not support HBA Mode.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1794'">
<!--XLATETHIS-->ERROR! Encrypted virtual disk is present on the controller.<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1795'">
<!--XLATETHIS-->Autoconfigure Behavior is already set to given mode<!--XLATETHIS-->
</xsl:when>
<xsl:when test="$id='1796'">
<!--XLATETHIS-->ERROR! Autoconfigure behavior mode is not supported<!--XLATETHIS-->
</xsl:when>
<!--Srik: call OMSA's ComCLIMsgID in commsg.xsl -->
<xsl:otherwise>
<xsl:call-template name="ComCLIMsgID">
<xsl:with-param name="id"><xsl:value-of select="CLIMsgID"/></xsl:with-param>
<xsl:with-param name="shownvpairs"><xsl:value-of select="CLIShowNVPairs"/></xsl:with-param>
<xsl:with-param name="nametxt"><xsl:value-of select="CLIParseName"/></xsl:with-param>
<xsl:with-param name="paramtxt"><xsl:value-of select="CLIParamName"/></xsl:with-param>
<xsl:with-param name="parsetxt"><xsl:value-of select="CLIParseTxt"/></xsl:with-param>
<xsl:with-param name="parsetxt2"><xsl:value-of select="CLIParseTxt2"/></xsl:with-param>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="NewLine"/>
</xsl:template>
<!--:Chethan Kumar 10/22/04 - Added the "ConfigSuccess" template to keep error messages consistent with DSA error messages -->
<xsl:template name="ConfigSuccess">
<xsl:param name="subCom"/>
<xsl:param name="paramNam"/>
<xsl:param name="parseTxt"/>
<xsl:param name="parseTxt2"/>
<xsl:choose>
<xsl:when test="$subCom = 'alertaction'">
<xsl:text>Alert action(s) configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'alertlog'">
<xsl:text>Alert log cleared successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'assetinfo'">
<xsl:text>Asset information set successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'cmdlog'">
<xsl:text>Command log cleared successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'esmlog'">
<xsl:text>Embedded System Management (ESM) log cleared successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'recovery'">
<xsl:text>System recovery actions configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'shutdown'">
<xsl:text>System shutdown in progress.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'thrmshutdown'">
<xsl:text>Thermal shutdown severity level configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'webserver'">
<xsl:choose>
<xsl:when test="$paramNam = 'start'">
<xsl:text>Secure Port Server started successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'stop'">
<xsl:text>Secure Port Server stopped successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'restart'">
<xsl:text>Secure Port Server restarted successfully.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Secure Port Server error.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$subCom = 'snmp'">
<xsl:choose>
<xsl:when test="$paramNam = 'rootpw'">
<xsl:text>SNMP root password set successfully.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Preference set successfully.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$subCom = 'useraccess'">
<xsl:text>User access rights set successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'cdvformat'">
<xsl:text>CDV format delimiter set successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'useraccess'">
<xsl:text>User access rights set successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'dirservice'">
<xsl:text>Directory service configuration set successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'events'">
<xsl:choose>
<xsl:when test="$parseTxt2='bytype'">
<xsl:choose>
<xsl:when test="$paramNam = 'all'">
<xsl:text>Events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'powersupplies'">
<xsl:text>Power supply events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'redundancy'">
<xsl:text>Redundancy events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'temps'">
<xsl:text>Temperature probe events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'fans'">
<xsl:text>Fan probe events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'volts'">
<xsl:text>Voltage probe events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'currents'">
<xsl:text>Current probe events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'log'">
<xsl:text>Log events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'fanenclosures'">
<xsl:text>Fan enclosure events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'accords'">
<xsl:text>AC Cord events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'memory'">
<xsl:text>Memory events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'intrusion'">
<xsl:text>Intrusion events configured successfully.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Event Configured successfully.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$parseTxt2='byoid'">
<xsl:choose>
<xsl:when test="$paramNam = 'powersupplies'">
<xsl:text>Single power supply event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'redundancy'">
<xsl:text>Single redundancy event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'temps'">
<xsl:text>Single temperature probe events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'fans'">
<xsl:text>Single fan probe event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'volts'">
<xsl:text>Single voltage probe event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'currents'">
<xsl:text>Single current probe event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'log'">
<xsl:text>Single log event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'fanenclosures'">
<xsl:text>Single enclosure event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'accords'">
<xsl:text>Single AC Cord event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'memory'">
<xsl:text>Single memory event configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$paramNam = 'intrusion'">
<xsl:text>Single intrusion event configured successfully.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Single event Configured successfully.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
<!--XLATESTART-->Event(s) configured successfully.<!--XLATESTOP-->
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$subCom = 'platformevents'">
<xsl:text>Platform events configured successfully.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'pedestinations'">
<xsl:text>Platform event destinations configured successfully.</xsl:text>
</xsl:when>
<xsl:otherwise>
<!--XLATESTART-->Command successful.<!--XLATESTOP-->
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<!--:Chethan Kumar 10/22/04 - Added "CLIParamFormat" template to keep error messages consistent with DSA error messages -->
<xsl:template name="CLIParamFormat">
<xsl:param name="format"/>
<xsl:choose>
<xsl:when test="$format = '1'">
<xsl:text>text</xsl:text>
</xsl:when>
<xsl:when test="$format = '2'">
<xsl:text>text</xsl:text>
</xsl:when>
<xsl:when test="$format = '3'">
<xsl:text>text (alphanumeric only)</xsl:text>
</xsl:when>
<xsl:when test="$format = '4'">
<xsl:text>number</xsl:text>
</xsl:when>
<xsl:when test="$format = '5'">
<xsl:text><true|false></xsl:text>
</xsl:when>
<xsl:when test="$format = '6'">
<xsl:text>number</xsl:text>
</xsl:when>
<xsl:when test="$format = '7'">
<xsl:text>number</xsl:text>
</xsl:when>
<xsl:when test="$format = '8'">
<xsl:text>d.d</xsl:text>
</xsl:when>
<xsl:when test="$format = '9'">
<xsl:text>number</xsl:text>
</xsl:when>
<xsl:when test="$format = '10'">
<xsl:text>date</xsl:text>
</xsl:when>
<xsl:when test="$format = '19'">
<xsl:text>percent (0-100)</xsl:text>
</xsl:when>
<xsl:otherwise>
<!--XLATESTART-->value<!--XLATESTOP-->
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<!--:Chethan Kumar 10/22/04 - Added "CLIObjNotFound" template to keep error messages consistent with DSA error messages -->
<xsl:template name="CLIObjNotFound">
<xsl:param name="subCom"/>
<xsl:param name="paramNam"/>
<xsl:choose>
<xsl:when test="$subCom = 'esmlog'">
<xsl:text>Error! Embedded System Management(ESM) log not found..</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'postlog'">
<xsl:text>Error! Power On Self Test (POST log not found..</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'alertlog'">
<xsl:text>Error! Alert log not found.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'events'">
<xsl:text>Error! Event type</xsl:text>
<xsl:value-of select="$paramNam"/>
<xsl:text> not found on this system.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'platformevents'">
<xsl:text>Error! Platform events are not supported on this system.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'pedestinations'">
<xsl:text>Error! Platform event destinations are not supported on this system.</xsl:text>
</xsl:when>
<xsl:otherwise>
<!--XLATESTART-->Error! Hardware or feature not present.<!--XLATESTOP-->
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<!--:Chethan Kumar 10/22/04 - Added "CLICommandFailed" template to keep error messages consistent with DSA error messages -->
<xsl:template name="CLICommandFailed">
<xsl:param name="subCom"/>
<xsl:param name="paramNam"/>
<xsl:param name="parseTxt"/>
<xsl:param name="parseTxt2"/>
<xsl:param name="stat"/>
<xsl:choose>
<xsl:when test="$subCom = 'webserver'">
<xsl:choose>
<xsl:when test="$paramNam = 'start'">
<xsl:choose>
<xsl:when test="$stat = '258'">
<xsl:text>Error! Secure Port Server is already started.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '-9'">
<xsl:text>Error! Web Server is not installed.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '1'">
<xsl:text>Error! Command not implemented on this operating system.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Cannot start </xsl:text>
<xsl:value-of select="$parseTxt"/>
<xsl:text> web server.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$paramNam = 'stop'">
<xsl:choose>
<xsl:when test="$stat = '258'">
<xsl:text>Error! Secure Port Server is already stopped.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '-9'">
<xsl:text>Error! Web Server is not installed.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '1'">
<xsl:text>Error! Command not implemented on this operating system.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Cannot stop Secure Port Server.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$paramNam = 'restart'">
<xsl:choose>
<xsl:when test="$stat = '258'">
<xsl:text>Error! Secure Port Server is already stopped. </xsl:text>
<xsl:call-template name="NewLine"/>
<xsl:text>Please start the Secure Port Server first.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '-9'">
<xsl:text>Error! Web Server is not installed.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '1'">
<xsl:text>Error! Command not implemented on this operating system.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Cannot stop Secure Port Server.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Server Administrator unknown Secure Port Server error.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$subCom = 'snmp'">
<xsl:choose>
<xsl:when test="$paramNam = 'rootpw'">
<xsl:choose>
<xsl:when test="$stat = '2'">
<xsl:text>Error! SNMP old root password entered does not match current value.</xsl:text>
</xsl:when>
<xsl:when test="$stat = '1'">
<xsl:text>Error! Command not implemented.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Attempt to set SNMP root password failed.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Attempt to set requested preference failed.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$subCom = 'events'">
<xsl:choose>
<xsl:when test="$paramNam != 'all'">
<xsl:choose>
<xsl:when test="$stat = '2'">
<xsl:choose>
<xsl:when test="$parseTxt2 ='byoid'">
<!--XLATESTART-->Error! Cannot enable single event at lower severity than current group setting.<!--XLATESTOP-->
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Cannot enable more events for type=</xsl:text>
<xsl:value-of select="$paramNam"/>
<xsl:text> than current type=all setting.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$stat = '1'">
<xsl:text>Error! Events setting failed.</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Events setting failed.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
<xsl:text>Error! Attempt to set events for all types failed.</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:when test="$subCom = 'platformevents'">
<xsl:text>Error! Platform events are not supported on this system.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'pedestinations'">
<xsl:text>Error! Platform event destinations are not supported on this system.</xsl:text>
</xsl:when>
<xsl:when test="$subCom = 'dirservice'">
<xsl:text>Error! Command failed.</xsl:text>
</xsl:when>
<xsl:otherwise>
<!--XLATESTART-->Error! Hardware subsystem reports command failed. <!--XLATESTOP-->
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
Zerion Mini Shell 1.0